#20366, "yes people post stupid shit when they're bored" In response to Reply # 0
im curious as to how prices here compare to everywhere else for machining and assembly ONLY (not engine removal). having favorable poll results to show my rebuilder may help me knock off a few dollaz...if you had extra costs for unnecessary labor dont include that, hopefully all i will need is assembly and machine work and can get the engine in and out myself.
#20367, "RE: yes people post stupid shit when they're bored" In response to Reply # 1
i paied 260 for the balancing of all the parts and the resurfacing, and cleaning of the head. That was the only expense beside the parts, gaskets, ect..
#20368, "RE: yes people post stupid shit when they're bored" In response to Reply # 2
$500 cash. I took parts off myself and took the block and head in(seperated) uncleaned with pistons, crank, rods still in block and valves and springs still on head. I got the head decked, new springs installed, 3 angle valve job, bored .020 over, rotating assembly balanced and the new pistons, new rings, new rods, new bearings and old crank installed. Of coarse, I gave him all the new parts.
#20370, "RE: yes people post stupid shit when they're bored" In response to Reply # 4
My dad does engine machineing/rebuilds. so i lucked out there. ive seen labor costs all the way up to close to 700 bucks for just machine shop work. my dad would charge about 250 for an overbore, hone, and decking the block/head, and anything minor machineing wise to the crank. I would put the pistons/rods/bearings in yourself, cause that will knock a good bit off the price. but definitely have it cleaned REAL good. too bad no more of you live around here... i could try and hook you guys needing a rebuild up.
1997 Silver RS Built T3/T4 BB Turbo 20psi Most current 1/8th mile time: 8.1@93mph 2.015 60' 1996 Black Supra TT 2004 Silver Snake
#20371, "RE: yes people post stupid shit when they're bored" In response to Reply # 5
where are you located dude?
Michael 99gs Boost It! Mods: no time to put in yet:315cc injectors. Hrc Stage 2 S-FMU Crane HI-6DI2 Greddy Type S Bov VC-2 Road Race Catch Can Greddy Profec B & Switch Apexi WS Catback Super Afc Autometer Boost, Egt,Tranny Temp Gauge & Cooler Air/Fuel Light & Digital Tokico Adjust Struts Eibach Pro Kit Springs Front & Rear Upper Bar CarCraft Interior Sound System= Bring it On
Michael 99gs hrc stage 5000 SOLD... 2004 Honda Accord V6 (240 hp)stock what other car should i buy?? hmmm Car info & pictures at http://www.cardomain.com/memberpage/520269
#20372, "RE: yes people post stupid shit when they're bored" In response to Reply # 6
I paid $200 for the work done to mine. That was installing the new pistons(.020 over), rods, and piston rings. I had everything balanced and blueprinted as well. Took engine out myself(with a help of a few friends )
#20374, "RE: yes people post stupid shit when they're bored" In response to Reply # 8
So is it ok if I just re-ring and install stronger pistons I don't really need to get anything machined? Is it a good idea to replace the timing belt while doing the rebild? What would I need to buy to do a rebuild?
http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr Who sez FF can't drift?
#20375, "RE: yes people post stupid shit when they're bored" In response to Reply # 9
I was chaarged 1000 to remove and replace engine. Machine shop services engine tear down Vat cylinder block deck block line hone block per journal grind crank shaft balance wrok..............$225 mount pistons assemble engine Valve job install steel guides portmatch per head portmatch per manifold engine gasket set..............123.00 steel guides...................4.17 ea......16 oil pick up.....................25.00 Machine shop total.................................2533.24 remove and replace.................................1000.00 Howell bottom end kit..............................1100.00