I was wondering, I have daily drive I just got done rebuilding and it has a nice hole in the front bumper where the latch is.. (previous owner couldn't get the hood open so they decided to cut a nice hole...) Would window weld work to fill the hole and then sand? I'm not looking for professional results and don't really want to spend much for the repair, so I was wondering what anyone had used to repair the urethane bumpers for a cheap remedy besides buying the plastic welders etc.
#105922, "RE: Fix front bumper hole and cracks" In response to Reply # 0
There are urethane bupmer repair kits that you can buy for ~$15 IIRC. I've used them in the past with decent results
Erik P. Official 2GNT thread Hijacker Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be... All we know is, He's not The Stig... But he is The Stig's Spartan cousin!
#105964, "RE: Fix front bumper hole and cracks" In response to Reply # 0
If your going to do it half ass I would leave it the way it is. Not trying to be rude, but the bumper covers are fairly inexpensive on craigslist, ebay, or even rockauto.com. I wouldn't suggest using a material such as the one you are asking about. They make the plastic welders for a reason. If your going to do it, do it right the first time. But if you think you have found a way to get it done, then do it your way. That's the joy of owning your own car, you can do it how you want.