I`ve been getting all the parts together to put fog lights in my 95 RS. I was looking at my wiring and theres an unused plug on the driver`s side wiring by the radiator taped up. Anybody know what it`s for?
Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim
#104841, "RE: Plug question" In response to Reply # 2
If it was taped back to the rest of the harness it should be the connector for the stock fog light harness.
Erik P. Official 2GNT thread Hijacker Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be... All we know is, He's not The Stig... But he is The Stig's Spartan cousin!
Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim
#104844, "RE: Plug question" In response to Reply # 4
That's what I thought. But in the relay box, the spaces for the relay and fuse for fog lights have no connectors installed. Plus, there is no plug on the passenger side of the radiator, if in fact it is for the fog lights. Is there something I'm overlooking in making this wiring work for the foglights? Do I need to go to a salvage yard and pick up any other components from a donor car? I'm trying to use as much factory wiring as possible.
#104848, "RE: Plug question" In response to Reply # 5
After getting tired of trying to find what this wire is for and where it goes (or ends) I've decided to go with a universal fog light wiring kit. I'll be using a kit with a relay. Which wires on the factory fog light switch will I need to splice into? I'm still trying to make it all look as OEM as possible.
#104849, "RE: Plug question" In response to Reply # 6
Originally posted by electrohead After getting tired of trying to find what this wire is for and where it goes (or ends) I've decided to go with a universal fog light wiring kit. I'll be using a kit with a relay. Which wires on the factory fog light switch will I need to splice into? I'm still trying to make it all look as OEM as possible.
Use a multimer and ohm it out. I think its green and green/white. They are the actual switched ones. I just did this not too long ago.
Also, non fog cars are not wired into the engine bay for lights, thats why you cant find the harness
#104851, "RE: Plug question" In response to Reply # 7
Thanks. When you wired your fogs, did you use an existing hole in the firewall for the switch wires, or did you drill a new one. I just wish I new what that plug is supposed to be for.