Had my and my friend try it tonight. Problem is there are so many links out there that seem to say different things about how to wire them. Now the car will start and run extremely rich (bogs when i give it gas), but the afc won't even come on. Anyone have a decent wiring diagram for me to use? I'm taping the ecu hookup by the pedals.
#12001, "RE: HELP with s-afc II install!" In response to Reply # 0
Originally posted by weepul Had my and my friend try it tonight. Problem is there are so many links out there that seem to say different things about how to wire them. Now the car will start and run extremely rich (bogs when i give it gas), but the afc won't even come on. Anyone have a decent wiring diagram for me to use? I'm taping the ecu hookup by the pedals.
posting it five times wont get you anywhere on this board.....
#12002, "RE: HELP with s-afc II install!" In response to Reply # 0
Originally posted by weepul Had my and my friend try it tonight. Problem is there are so many links out there that seem to say different things about how to wire them. Now the car will start and run extremely rich (bogs when i give it gas), but the afc won't even come on. Anyone have a decent wiring diagram for me to use? I'm taping the ecu hookup by the pedals.
First ... THIS IS NOT EVEN CLOSE TO ADVANCED TUNING!!!!
Uhh ... ECU hookups by the pedals? WTF are you talking about. Is this in a 2gNT? ECU is in the engine bay. If you're tapping wires in the cabin your tapping the WRONG wires ... probably why you're AFC doesn't even come on. Go grab a Chiltons and match up the wire colors that you need for the AFC to the ones listed coming out of the ECU in the chiltons.
#12003, "RE: HELP with s-afc II install!" In response to Reply # 2
First of all...sorry to the mod for the multiple posts. The page froze and I clicked the Post Message button several times, but I didn't think it'd post 4 times. My appologies.
About the ECU wiring harness in the cab...I was trying to follow the instructions on the link below. We followed everything and the car would start but die immediately afterwards. We then switched the main power and ground (I think there's 2 red and black wires at each side of the plug) and got it at least running, but hog rich! Help!
#12005, "RE: HELP with s-afc II install!" In response to Reply # 4
OK. You REALLY need to find better instructions that that. And I hope for your sake, by having the power and ground backwards, you didn't fry your S-AFC.
__________________________________________________________ -Tony <--- NOT asian. '06 Wicked White EVO IX
Originally posted by Avenger When I raise the BS flag ... it's a really big fucking flag and I raise it really fucking high too.
"Never whistle while your pissing." ~The illuminatus Trilogy
#12006, "RE: HELP with s-afc II install!" In response to Reply # 5
Originally posted by eclipzGST OK. You REALLY need to find better instructions that that. And I hope for your sake, by having the power and ground backwards, you didn't fry your S-AFC.
So, got any suggestions as to a site? btw the afc is ok
#12008, "RE: HELP with s-afc II install!" In response to Reply # 7
Looks like a lot better information! Thanks for the help....just 1 Q though.
It says for orange wire, "air flow signal input(to AFC)" and for pink wire, "air flow signal output(from AFC, to ECU)". Does this mean that if I have an existing A/F guage installed, I need to splice the input/output from that instead of the ECU harness?
#12009, "RE: HELP with s-afc II install!" In response to Reply # 8 Dec-27-03 03:32 AM by weepul
Originally posted by weepul Looks like a lot better information! Thanks for the help....just 1 Q though. It says for orange wire, "air flow signal input(to AFC)" and for pink wire, "air flow signal output(from AFC, to ECU)". Does this mean that if I have an existing A/F guage installed, I need to splice the input/output from that instead of the ECU harness?
I'm retarded, sorry. I read that when I was stoned last night and thought I actually had a decent reply =P
Here's an actual question though, but I could still be retarded, so help me out =P Like when it's referring to the 2 ground signals, and it has one closer to the ECU than the other....where's closer to the ECU? Would it be closer to that harness by the pedals, or further down the wire cluster? My guess is that 'closer to the ECU' is further down the wire cluster and away from the harness, because aren't those wires feeding from the ECU in the engine bay and through the firewall to the harness?
#12010, "RE: HELP with s-afc II install!" In response to Reply # 9
What harness by the pedals are you talking about? Is this a 1g or a 2g? You need to be a LOT more specific.
When it says closer to the ECU, that means you need to actually physically tap the wire closer to the ECU than the other one. That means tap the same wire, but about an inch closer to the ECU. Make sense?