Anybody here have one? I just got one recently and had it powdercoated and the whole bit, but noticed that the holes that the valve cover bolts slide through are a larger diameter than the Mitsu VC. So I'm wondering if there is supposed to be sleeves or rubber grommets in there or something .... I've done some Googling on Huydia parts stores but can't really find anything.
#5334, "RE: 4G63 Huyndai Valve Cover" In response to Reply # 1
The actual VC bolts that hold it down. I know they are 10mm bolt, but the diameter in of the holes in the VC is much larger. Are the bolts supposed to be sleeved or something?
#5338, "RE: 4G63 Huyndai Valve Cover" In response to Reply # 2 Mar-31-08 11:38 AM by Hult250R
the bolts are actually a larger diameter then they step down at the tnd for the threads, Ill try to get you a pic of one of them. youll probably have to get the bolts for it from the junkyard or somethin. Or maye have someone machine you up sleeves for the stock bolts. (which I could possibly do )
----------------------------------------
I used to have a 420A...
'92 TSi AWD
11.8 @ 119mph 470awhp 405 ft/lb torque 30psi on E85 w/ Borg Warner S256 Turbo