I didn't install my SAFC but here recently I've decided I'm tired of having other people do my work for me so I'm trying to take care of my problems myself. I need a little help tho, I've pulled the electrical tape from the wires but I'm stuck on what to do, can someone guide me through it? I have some pics, not sure if they'll be of any help. <br> <br>
#1728, "RE: Uninstalling SAFC II from 99 eclipse rs" In response to Reply # 0
Well as you can see most of the SAFC wires are just tapped into the factory wires. those can be unsoldered or cut in the clear and the factory wires can be taped up. 2 wires from the SAFC when spliced actually cut the Map signal wire. These two wires need to be cut away from the SAFC and spliced back together.
That should complete the removal of the Harness splicing.
#1733, "RE: Uninstalling SAFC II from 99 eclipse rs" In response to Reply # 1
Originally posted by Star Turbo Talon Well as you can see most of the SAFC wires are just tapped into the factory wires. those can be unsoldered or cut in the clear and the factory wires can be taped up. 2 wires from the SAFC when spliced actually cut the Map signal wire. These two wires need to be cut away from the SAFC and spliced back together. That should complete the removal of the Harness splicing. Terry
If the SAFC was installed correctly you don't have to cut or solder anything to disable it, there are connectors included with the system that allow the user to un-bypass the MAP sensor output.