I have 450cc injectors and was going to go the route of fuel pump, injectors, sfmu, megasquirt, ect. But now I'm thinking of just getting a portfueler, while on Hahn Racecrafts webpage a came acroos some prices. Is the portfueler mounting system everthing I need or will I also need to buy control module and the calibration program software or is that all included in the system?
you will have to buy each piece. Hahn lists everyting separately since some people only need portions of his setup. If you buy the entire kit, its 1000.00 or a little over.
my portfueler with everything that came with it minus the tach adapter since i have a msd dis2 and aeromotive 1:1 since i already had one was just over 1k and its only a few months old so use that as a price guide.
i also got the programming software. this is a definite must.
Does anyone know why I would need to use the tach adapter that I just got with my Portfueler kit?
I have a MSD ignition coil on the car now, and currently run my zeitronix tach signal line directly to my computer. Cant the ECU tach/RPM pin also serve as an RPM signal for the Portfueler?
1999 Eclipse GS Built motor Hahn 16G Turbo w/ FMIC Hahn Stage 5 Portfueler (270's & 500's) Zeitronix Zt-2 wideband w/ 3.5bar MAP 3" SS Turbo Back CM Stage 4 Clutch and Fidanza Flywheel Baer Big Brake Kit
Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim
they don't include it. It's an extra $50 or so. If you have an MSD ignition, the tach is not required. Not exactly sure why the brains at hahn wants you to use this rather than just tapping into your RPM signal at the ECU
Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim
I actually spoke to Bill Hahn today and he said that becuase the 420A runs off a distributor'less ignition, the tach signal that the ECU puts out is not with what the Portfuler module looks for. The tack adapter modifies the signal to be compatable with the Portfueler module.
Originally posted by 420agreenvilleSC Not exactly sure why the brains at hahn wants you to use this rather than just tapping into your RPM signal at the ECU
Because they might know what they were doing when they built a "for the public" mod?
Originally posted by Ebster1085 I actually spoke to Bill Hahn today and he said that becuase the 420A runs off a distributor'less ignition, the tach signal that the ECU puts out is not with what the Portfuler module looks for. The tack adapter modifies the signal to be compatable with the Portfueler module.
The tach adaptor does more than just modify the stock signal, it intercepts it and provides the signal to not only the Porkfueler but also to the stock ECU emulating the stock tach wire signal and keeping the ECU from throwing a CEL.
Built. That's All... ......................................................................................................................... www.monkeybuttpirate.com ......................................................................................................................... 2 Fingers of Scotch with a milk back... Stat!