Ok i have one question and that is has ne one on here had there phantom grip fail. I got the money to order one and sence i have to put in another tranny i wanted to go ahead and put one of those phantom grips in. thnaks
built turbo 99 rs-back to stock and parted out Now: 2003 S2000 Aem ems, 1000cc injectors, inline pro 3mm headgasket, T67 turbo, full race manifold, Tial 44m wastegate, Tial 50mm bov, 255 fuel pump, kaaz 1.5 lsd, comptech bearing caps, j's 4.77 gears, and so much more
Acutally no one has had one fail ever I believe. I just took my tranny apart and installed it. Pretty easy install. Just watch out when you take out those plates holding the springs they go flying
Boca Raton, Florida 95 Eclipse GS- sold 99 Eclipse GSX- 386awhp 98 Eclipse GS- sold 92 Prelude
thanks for the repl As far a launching the car off line have u been able to tell a big differnce?
built turbo 99 rs-back to stock and parted out Now: 2003 S2000 Aem ems, 1000cc injectors, inline pro 3mm headgasket, T67 turbo, full race manifold, Tial 44m wastegate, Tial 50mm bov, 255 fuel pump, kaaz 1.5 lsd, comptech bearing caps, j's 4.77 gears, and so much more
I have heard that the Neons need the pinion shaft soldered cause of potential of a fall out. Is that not an issue with our trannys? I too plan to get the PG very soon..
When you get them you will see that the top is rounded and goes about 1/2" higher. You need to cut part of the top off and make it about even with that little lip like mine is. If you don't shorten them up the top will hit the speedo gear and break it.
>From the dealer. It's Part #04800059AA > >When you get them you will see that the top is rounded and >goes about 1/2" higher. You need to cut part of the top off >and make it about even with that little lip like mine is. If >you don't shorten them up the top will hit the speedo gear and >break it.
That pic look a little dark, if it's not too much to ask, could you email me a better picture or post it here of the pin assembly. Also any other issue that should be dealt with with the install of the PG in out tranny? TIA