Hi, I have a 98 Eclipse Spyder with remote keyless entry and alarm. Everythings been working fine up until I decided to put some new batteries in my aftermarket remote and reprogram the keyfob. Car wouldnt go into programming mode like it should when grounding my number 1 pin and so forth. Sent remote in for warranty thinking maybe that was the problem. Got new remote and still couldnt get my car into programming mode which I had done before without problems. I also realized at this time that my car wasnt being armed when I used the key to lock the doors which use to work. Also noticed my security light doesnt go on anymore on the dash, not even when I first turn the key to the on position. Would this be a bad ETACS-ECM issue you think? Also, is there a way to manually reprogram the remotes or somehow reset the Module? This is just weird all together since everything happened after I changed my remote batteries and kept trying to reprogram before the warranty exchange. I also checked and made sure my fuse wasn't blown. Also made sure power was getting back to the keyless entry box. I also have new door pin switches I decided to put in 3 months ago, so I dont think that would cause a non-responsive issue here. Does anyone know what would cause my car not to go into programming mode? I have brand new key fob and I can even program that. p.s. One last thing I sorta found weird. My cruise control isn't working anymore, which use to work just fine. Dont know if they are a related issue, but figured I would mention that incase there was something related between the two. Thanks and sorry I wrote so much here to read.
#12745, "RE: 98 Eclipse Factory Alarm Non-Responsive" In response to Reply # 0 Mar-28-07 05:27 PM by hiexpect
Figured out my whole problem and now everythings working!!
I had installed some glow gauges not long ago and had hooked up the power wire to the wrong GN/WT wire causing the system to stay grounded with the alarm disabled.