I have a ebay alarm/ keyless entry system I just hooked up on my talon. The car didn't have factory alarm or keyless entry. Everything works perfect except for one thing. After 15 seconds the alarm is suppose to arm itself.
Here's the problem, when the key is on the alarm still arms itselt. Is there a wire I'm suppose to hook up that tells the alarm the key is on? I have two thick red wires I ran to battery (+), and a yellow wire I'm suppose to run to a relay for ignition kill. I didn't hook up the yellow wire because I couldn't figure out how to wire it to the 4 pin relay that came with the kit.
I really need some advice because I JUST got my car painted (literally got it home yesterday) and I want the alarm to keep people from touching my car.
I CONTRIBUTED TO THE WIKI! ah... turbo. I love the turbo, the boost, the speed, the sound. and its all better when you do it yourself. cheaper too.
Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim
#13056, "RE: How to keep alarm off when key is on" In response to Reply # 1
Originally posted by 420agreenvilleSC this is exactly why you have alarms installed by a retailer.
Yea that is true but at the same time, you never know what you can do until you try. I mean if everyone just got a dealer or shop to install everything then this site probably wouldn't be here.
And I don't know Zac, but I sure would appreciate his help right about now.
I CONTRIBUTED TO THE WIKI! ah... turbo. I love the turbo, the boost, the speed, the sound. and its all better when you do it yourself. cheaper too.
#13057, "RE: How to keep alarm off when key is on" In response to Reply # 2
What has to happen for the alarm to arm itself? Im assuming a key turn of some sort? Like if you turn the key off it would arm. If this was the case, it sounds like you may have something connected that is 12v when key on, but not cranking. Which, when you turn the key on and then crank, the alarm would see as you turning the car off, and arming the alarm.
The only thing my car alarm does of that sort is if I turn the car on and the doors are closed, the doors automatically lock.
95 Eclipse GS: 10.5:1, Crower 2's and MSII 186 WHP - 150 WTQ 14.697 @ 93.85 MPH......Gone, but not forgotten 99 420A Avenger: Given to my sister 99 GS OZ: Sold 03 Evo 8: Family Car with balls
#13058, "RE: How to keep alarm off when key is on" In response to Reply # 3
Well it has 2 thick red power wires. In the manual it says wire them both to constant 12V. So... I ran them straight to the battery.
I googled it yesterday and I found a link to dsm tuners that said I have to run a wire to the black/white wire in the ignition harness. Any idea what purpose that wire serves? I don't want to tap into something I'm not sure what it does. Here's the link, it's the picture that the guy drew up on paint.
I know somehow it needs to be able to tell when the key is in the off position, but the crappy diagram that came with the unit doesn't really say what is the keysense wire.
I CONTRIBUTED TO THE WIKI! ah... turbo. I love the turbo, the boost, the speed, the sound. and its all better when you do it yourself. cheaper too.
Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim
#13060, "RE: How to keep alarm off when key is on" In response to Reply # 5
If I remember correctly, black with white is 12v switched. It could be so when you turn the car off, the doors unlock, and the system arms itself after a certain time if its equipped with such curcuitry.
95 Eclipse GS: 10.5:1, Crower 2's and MSII 186 WHP - 150 WTQ 14.697 @ 93.85 MPH......Gone, but not forgotten 99 420A Avenger: Given to my sister 99 GS OZ: Sold 03 Evo 8: Family Car with balls
#13061, "RE: How to keep alarm off when key is on" In response to Reply # 5 Apr-25-10 02:06 PM by eclipserstturbo
Originally posted by 420agreenvilleSC good link
Thanks, I figured it may be useful to others too, especially those trying to wire a turbo timer in.
So anyway do you think if I wire one of the 12V constants from the brain to that black/white wire it may solve my problem?
Or maybe I'm suppose to wire a (-) somewhere in there that grounds when the key is out. I might be thinking to far into this.
I've been trying to find out what is the keysense wire on the ignition so I'm guessing that is it. It's got to be something that makes it beep when the key is in and the door is open. I'll try some more googling to see if I can find a diagram of the our ignition saying what each wire is for since the haynes doesn't really tell me much.
I CONTRIBUTED TO THE WIKI! ah... turbo. I love the turbo, the boost, the speed, the sound. and its all better when you do it yourself. cheaper too.
#13062, "RE: How to keep alarm off when key is on" In response to Reply # 5
Well, searched but no answer. Think I'm going to try the black/white with each thick red wire from the unit and see what I come up with. Hopefully I can figure it out without fudging up anything.
I CONTRIBUTED TO THE WIKI! ah... turbo. I love the turbo, the boost, the speed, the sound. and its all better when you do it yourself. cheaper too.
#13063, "RE: How to keep alarm off when key is on" In response to Reply # 8
Originally posted by eclipserstturbo Well, searched but no answer. Think I'm going to try the black/white with each thick red wire from the unit and see what I come up with. Hopefully I can figure it out without fudging up anything.
Different brand alarms have different color codes for wires, what brand is the alarm?
