Does anyone know where I can find a 3" 5 bolt discharge flange in either stainless or mild steel? Only found one at ATP Turbo and its 30 bucks! Anyone know any place else cheaper!?

Try RRE I'm assuming you are talking about a t-3 style outlet flange, I don't know if it is 3" give them a call. This is precisely why I make all of my own flanges, they cost too much.

Enjoy my good man :thumbsup

http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=tp&Category_Code=FLS


EDIT: Im an idiot, lol. Sorry, it was 6 in the a.m. when I replied to this. Anyways, Ive also seen them on Ebay. Im always on there, so if I see one, I'll send a link to this thread.

Anyone else know of anywhere who has the 5 bolt t3/t4 3" flanges BESDIES ATP Turbo?

http://cgi.ebay.com/ebaymotors/NEON-AVENGER-420A-T3-T4-TURBO-DOWNPIPE-EXHAUST-FLANGE_W0QQcmdZViewItemQQcategoryZ33666QQitemZ250095674825QQrdZ1


get that bad boy and bore it out?

Originally posted by talon749
http://cgi.ebay.com/ebaymotors/NEON-AVENGER-420A-T3-T4-TURBO-DOWNPIPE-EXHAUST-FLANGE_W0QQcmdZViewItemQQcategoryZ33666QQitemZ250095674825QQrdZ1 get that bad boy and bore it out?

Thought about doing that but I dont know yet...still trying to find one cheaper before I get into that.

Mike, if the turbo turbine outlet is not 3", it doesnt matter. As long as there is enough material on the flange to weld the pipe to, your good.

Terry

interesting, I can laser cut flanges from both stainless or mild steel for cheap.


--------------------------------------
Santiago
boosted 420a...(2.2l v8 eater)
02 WRX
95 T/A 383ci
03 Harley XL 92ci w/ NOS

Originally posted by Star Turbo Talon
Mike, if the turbo turbine outlet is not 3", it doesnt matter. As long as there is enough material on the flange to weld the pipe to, your good. Terry

Turbine is 3" Terry.

My buddy from work has a friend who is going to CNC one for $15.

Thanks for the input and suggestions though guys.