I know im on the good way but im not sure for some little things about fitting.

If I look at this writeup :

http://www.2gnt.com/index.php?d=SFMU%20Installation%20Diagram

It was done with 4an fitting.

In my can I will have 6an fitting on return and feed port of s-fmu... for sure Ill need 4 an female from test port... to 6 an female to connect to the 6an SS line. The diagram uses a 4an T... mine will be a 6an "T" right ? (3 female fittings...) here is the first problem... my fuel pressure gauge is 1/8 male NPT. I can find 4an male with 1/8 npt female but no 6an male with 1/8 male. No way to connect my fuel pressure gauge ? Ok now for the return line... I will use fuel rubber line or maybe aluminium one. I have a 6 an on the sfmu and the stock return tube on fuel pump. What is the fitting ill need to connect my rubber hose to sfmu ? Barb to 6an female ?


Thanks !

get a 6an to 6an to 1/4'' and a 1/4'' to 1/8'' reducer if u cant find a 6to6to1/8''

put this inline:

http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_752574_-1_10019

jegs is a great place for all those parts. I did my whole fuel system from them, they ship really quick, like 2 days.