Hi,

ive bought a used fmic 1 month ago but it is soooo big. Im auto with A/C and cant figure out how to mount it... the only way its to remove the metal reinforcement in the bumper and it will be a pain to pass the piping. So since im planning only 8psi I want to use the 2G oem smic. Is this one enough ?? and someone know the inlet and outlet size ?

Thanks!

Originally posted by ChloRure
So since im planning only 8psi I want to use the 2G oem smic. Is this one enough ?? and someone know the inlet and outlet size ? Thanks!

It's perfectly fine for 8psi, people use it at twice that, not the most efficient buy still works

Perfect, and for the size of inlet and outlet ? Ive read about 2.25" but dont know if its same for outlet and intlet and if its realy 2"1/4

Originally posted by ChloRure
Perfect, and for the size of inlet and outlet ? Ive read about 2.25" but dont know if its same for outlet and intlet and if its realy 2"1/4

I know it's slightly different than the 1g one but I know they're similar, the 1g one is around 1-3/4" maybe 2" if I remember correctly

2G SMIC is 2". Just measured it actually a couple days ago.

Right, so if I buy 2" pipe will it be ok or I need to buy a littler bigger like 2"1/4 ?

Originally posted by ChloRure
Right, so if I buy 2" pipe will it be ok or I need to buy a littler bigger like 2"1/4 ?

2" is fine, but you're going to need to go larger to fit on the throttle body. turbo to intercooler should be 2" piping, your turbo outlet is probably 2". intercooler to throttle body your going to have to either modify the end tank for larger piping or start with 2" piping and expand up to 2.5" You're either gonna need a coupler that changes diameters or weld some pipes together that increase diameter.