Just wondering if anyone has ever tried to put the port fueler on a car with a venom intake manifold, looks like the baseplate for the manifold will make it too thick for the studs? Haven't got around to test fitting it, how far in did you guys put your studs i hand tightened them till they stopped? any help will be great thanks.

hand tight till they bottom out is fine, as long as they are in enough to not strip the threads or break.

If they are too short, buy longer ones.

You will have to get longer studs even with the stock manifold. I think the most pressing issue will be clearance between the plenum and the firewall. I had an OBX manifold and there was hardly any room back there to start with, add another inch and I think the hose fittings on the back will touch.

true the manifold is close as is but its low enough to go under the bulk of the firewall and the port fueler is only about a 1/2" wide

Originally posted by R34Eclipse
Just wondering if anyone has ever tried to put the port fueler on a car with a venom intake manifold, looks like the baseplate for the manifold will make it too thick for the studs? Haven't got around to test fitting it, how far in did you guys put your studs i hand tightened them till they stopped? any help will be great thanks.

do what i did
go to lowes and get socket head bolts and lockwashers that are long enough to work.

probably what i will end up doing, what did u use to mount your portfueler module to the fuse box? i have mine in the same spot using double sided tape didnt know if you found a screw in point?

velcro