Ok i have a SAFC2 and i've been reading the forums and it seems i need another device called a Fuel cut defender. I have everything to turbo my car except for that, Does anybody know where i could find one for cheap, and if so is there any tech guieds that show me how to connected it up

ill sell you my missing link for 40 shipped . all you have to do it bolt it on . it goes between the intake and map sensor

Buy a custom made FCD. A couple members here make them. average is 20.00 and they take about 1 day to make. Or if your good with soldering you can make it yourself.

Terry

Originally posted by Star Turbo Talon
they take about 1 day to make

1 day? More like 10 minutes.

If your even half way decent w/ a soldering iron in your hands i'd recommend making it yourself. Do a search for the Mopar FCD and it will provide you w/ step by step instructions on how to do it, its very easy. The part numbers from Radio Shack are provided with it, its fool proof.

epoxy takes time to fully cure so i can sand it nice and clean then painting takes a couple hours as well so it looks pretty.

Originally posted by boosted60trimrst
ill sell you my missing link for 40 shipped . all you have to do it bolt it on . it goes between the intake and map sensor

Thanks for all the help, i think i'll be buying one from boosted60 you hopefulyl when im completely done i'll take some pictures, im trying to gather everything i need before i stick it all on there :p

Oh and one last question, i havnt bought my FMIC yet, any suggestions on the size, i kinda dont want to cut that big black bumper thing so any suggestions?

i think u have to cut it out or totally remove it .

I know when i installed my hahn fmic the piping went right over where the black hard bumper went into the chassis so i had to remove it.