Here's some pictures of my car and my recent turbo project coming to an end.

Nice job on the turbo setup!

Very interesting fuel feed line adaptor setup. What Aeromotive FPR is that?

it looks like the 1:1 with the -6 ports
A1000-6 part#13109.

makes me wanna try very hard to have a nice turbo setup like yours

good job

Originally posted by baxsom
it looks like the 1:1 with the -6 ports A1000-6 part#13109.

Thats what I thought too, but isn't there a problem with that?

Originally posted by Aggression

Originally posted by baxsom it looks like the 1:1 with the -6 ports A1000-6 part#13109.

Thats what I thought too, but isn't there a problem with that?

hmm no you can use it with the stock rubber hose... get -6 -> -4AN unions with -4AN hose barb ends. Or are you talking about how he has no more windshield washer fluid resevoir?

Thanks the same regulator I have Jeremy, and same location, no more washer resevoir.

Who needs the washer resevoir anyway? Heh.

Nice job man. Looks clean.

Looks like a star manifold, what WG are you using and do you have any hood clearance issues?

http://www.dsmregistry.com/detail.php?carid=1030

that intercooler looks familiar :)

This is what I was referring too when I made that comment above!

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=94633&mesg_id=94633&page=

Nice :)

What's up with that open external wastegate flange on the manifold?

Originally posted by totaleclipse_05
What's up with that open external wastegate flange on the manifold?

hes not finished...

Originally posted by RoughRider01
hes not finished...

Originally posted by powellds
Here's some pictures of my car and my recent turbo project coming to an end.

Originally posted by totaleclipse_05

Originally posted by RoughRider01 hes not finished...

Originally posted by powellds Here's some pictures of my car and my recent turbo project coming to an end.

Coming to but not currently AT an end... when you say to some one, are you coming over? they are not there yet.
:+ There are so many other things unfinished... Like the battery is disconnected and the radiator hose clamps are in the center of the hose, and the Aeromotive doesn't have a vac/boost hose or fuel hoses going to it, ecu isn't plugged in...

Yeah, almost done, I am getting the Tial 38mm wastegate, I hope there aren't any clearance issues. I still need to get the aeromotive fittings as well. I have on the way right now the Zeitronix WBO2 with EGT and the Greddy emanage to control my fuel. I will post pics as soon as it's finished. Thanks for the compliments.

Originally posted by CarbonFiberRST
Coming to but not currently AT an end... when you say to some one, are you coming over? they are not there yet. :+ There are so many other things unfinished... Like the battery is disconnected and the radiator hose clamps are in the center of the hose, and the Aeromotive doesn't have a vac/boost hose or fuel hoses going to it, ecu isn't plugged in...

Well the title of the thread said "My new turbo engine bay..." so I figured at least all the turbo components would be on it.

And since we are looking into what people say so much, my statement could have been meant as "What are your plans for the open external wastegate flange"

Not trying to fight, but make my point.

To powellds:
Pics look good so far, thanks for clarifying, can't wait to see the finished product :thumbsup

Screw the car, I want the boat!

Originally posted by Dualgen2
Screw the car, I want the boat!

Oh yeah, that's my other baby. Just went wakeboarding the other day too. Damn gas prices anyway.