Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectstainless line to stock fuel rail possible?
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=94312
94312, stainless line to stock fuel rail possible?
Posted by Dan Zeller, Mar-31-06 12:07 PM
In the write up in the FAQ section they use a motofool rail. Can we somehow hook up a stainless steel fuel feed line to our stock rail?
94315, RE: stainless line to stock fuel rail possible?
Posted by thedawg, Mar-31-06 01:21 PM
Yes.

94316, RE: stainless line to stock fuel rail possible?
Posted by MR BLUNT 2gnt, Mar-31-06 02:20 PM
Thats incredibly descriptive. Care to give the guy a few clues as to what all went into that nice looking piece?
94318, RE: stainless line to stock fuel rail possible?
Posted by Dan Zeller, Mar-31-06 04:05 PM
ya thats sweet, how did you do that exactly? did you cut off the existing tube etc, and then drill and tap the ends?
94339, RE: stainless line to stock fuel rail possible?
Posted by willmayo, Apr-01-06 02:10 PM
looks to me like the ends were cut, and weld-on -an fittings were welded in.
94403, RE: stainless line to stock fuel rail possible?
Posted by jamesman, Apr-06-06 06:48 AM
Heyyyy that looks like my rail Dan!

Well. I cut the old hardline on the bottom off and then threaded the hole and put an allen head screw to plug it. Then I took the FPR out of one end of the rail (95 rail) and then cut the snap ring flange off the rail. I then cleaned the cut area and soldered, using 95/5 solder, a steel -6 AN adapter to the rail. The other end is solid so I drilled and tapped that end for an -6AN adapter.

that it

lates
james
94404, RE: stainless line to stock fuel rail possible?
Posted by thedawg, Apr-06-06 08:12 AM
Aha! I've found a way to lure you out of hiding :+
94412, RE: stainless line to stock fuel rail possible?
Posted by jamesman, Apr-07-06 01:26 PM
MWHAAAAhahaaaa.

hehe yup! oldschool pics!


lates

James