Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subject Got new missing link but still furl cutting but no code
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=93777
93777, Got new missing link but still furl cutting but no code
Posted by ameclipse, Mar-10-06 09:16 AM
ok i got the new missing link. it works but i am still getting cut. i dont get a code anymore and it doesnt buck but when i slam it fast 4-5psi trien to reack 8 psi i loose total power untill let up then it starts to get fuel. i know im leaking out of the hot side of the turbo to the DP quite a bit. do you guys think it is causing the o2 sensor to mess with my fuel also do you think it is my map sensor. im putting a new hotside on tomarrow to fix the leak and im also putting the correct ngk plugs in so ill keep everyone updated. i have read other threads but people stop updating thier post when they fix the problem. Any help will be appreciated.
93778, RE: Got new missing link but still furl cutting but no code
Posted by DJ420a, Mar-10-06 09:36 AM
You sure you dont have a boost leak? If you do, you can have the same symptoms.

Been there...
93780, RE: Got new missing link but still furl cutting but no code
Posted by ameclipse, Mar-10-06 11:22 AM
no no boost leak cause my gauge shows boost up to 8psi but im not realy going anyware casue of fuel cut i boost but slow down till i let up on the throttle and then the fuel kicks back in and i take off fast as hell boosting about 5psi.
93782, RE: Got new missing link but still furl cutting but no code
Posted by ameclipse, Mar-10-06 12:13 PM
do you guys think i should get the rewire kit for my walboro 255. think that would help. ill probably have more of this narrowed down tomarrow when i put the manifold back on and get rid of the massive exhaust leak.
93783, RE: Got new missing link but still furl cutting but no code
Posted by donnyb373, Mar-10-06 05:04 PM
have you thought about using a voltage clamp?
93786, RE: Got new missing link but still furl cutting but no code
Posted by Blizare, Mar-10-06 07:08 PM
Do you have a problem with spelling?
93801, RE: Got new missing link but still furl cutting but no code
Posted by RoughRider01, Mar-12-06 09:25 AM
Originally posted by ameclipse
ok i got the new missing link. it works but i am still getting cut. i dont get a code anymore and it doesnt buck but when i slam it fast 4-5psi trien to reack 8 psi i loose total power untill let up then it starts to get fuel. i know im leaking out of the hot side of the turbo to the DP quite a bit. do you guys think it is causing the o2 sensor to mess with my fuel also do you think it is my map sensor. im putting a new hotside on tomarrow to fix the leak and im also putting the correct ngk plugs in so ill keep everyone updated. i have read other threads but people stop updating thier post when they fix the problem. Any help will be appreciated.


You always want to fix the problems you know you have first (the exhaust leak) then if that doesnt help start looking somewhere else.

93806, RE: Got new missing link but still furl cutting but no code
Posted by donnyb373, Mar-13-06 07:52 AM
a voltage clamp will fix fuel cut due to map problems....missing link sucks ball imo and dont work somtimes
101555, RE: Got new missing link but still furl cutting but no code
Posted by spooled420, Sep-26-07 06:26 PM
Originally posted by donnyb373
a voltage clamp will fix fuel cut due to map problems....missing link sucks ball imo and dont work somtimes
what exactly is a voltage clamp?Im having the same issues my car seems to bog and accelerate slow till I let of the gas about halfway then it seems to take off,I dont think I need a fcd since its a 95 model ecu.what else is there to check for?