I took the battery out and move the inercooler pipe to the throtle body and remove the fuel line to the fuel rail and the two 13mm bolts that hold it to that bracket. The injectors spin in the manifold but I can even budge the fuel rail out. I have checked I cant see anything Im missing and I cant get anything down there to pry it out. Am I missing anything?

you got the two bolts that hold the rail to the manifold

i always found it easier to start at one end and pull up

then go to the other end then the middle

Heres all the peice minus the top part of the sfmu. Im putting in 440's what spring,disc and ring do I use? Also does the spring go on top of the disc or below it when putting it back together

I think a search would be in order. YOU should know that!

HEY LOL i just posted a thread on this with same pics almost.. but howcome you got two of those spring retainer thingies (not sure what theyre called).. u got 2 with the bump on.. in my pic u can see that i have one with a bump on and the top one has a hole in it. IM CONFUSED. and if we took our time to post up pictures that means we both did our research.. hell i read the whole ONLINE instruction manual like 5 times and did not get what each part was called cause my sfmu came empty (used and parts came in a seperate bag).. and the manual started naming stuff that was already supposed to be inside sfmu which wasnt.

Originally posted by djtrickee
I think a search would be in order. YOU should know that!

Sick em DJ, you need your own smiley face just for you that holds a sign that says "search dumbass."

end whore