Well I have to tell my sister what exhaust to get me for christmas. And I plan on going with your setup. What exact muffler do you have. I know its a hayame but which one? And I am getting the pacesetter cat-back too. How much was it to have the muffler welded on to the paceseter cat-back? And was it a big problem or did it fit nicely? Thanks!!!!!


DAVE_FL
97 T-GS
HRC stage 2

Orlando DSM www.orl.dsm.org
DAVE99@cfl.rr.com

LAST EDITED ON 13-Nov-01 AT 05:49 PM (PST)

>Well I have to tell my
>sister what exhaust to get
>me for christmas.

I need siblings

And
>I plan on going with
>your setup. What exact
>muffler do you have.

Hayame Type 7

>I am getting the pacesetter
>cat-back too. How much
>was it to have the
>muffler welded on to the
>paceseter cat-back?

Around $40 or $50 cant rememeber exactly. Probably cheaper if you just take it to a muffler shop. I had the same shop that I bought it from do it (via outside contract). one middle man too many. Usually a $20 or $30 job.


And was
>it a big problem or
>did it fit nicely?

If a place called Mizer muffler can do it in 15min how much trouble could it have been :-) They have to do it on an angle to fit and although you cant tell from the pic its every bit as angled as an N1.


http://stan2gnt.homestead.com/home.html
Stan2gnt
Stan2va@aol.com
95 Talon 420A-Turbo
Former and future nitrous user

Yeah my sister buys me pretty good presents. Thanks for the info. I think I might be able to get this present before christmas. Hopefully.

DAVE_FL
97 T-GS
HRC stage 2

Orlando DSM www.orl.dsm.org
DAVE99@cfl.rr.com

Ok I looked on modacar.com and they have it there but it only has a 2.25 inlet diameter. Does yours have that same inlet size? And is the hayame "XTR" type 7 the same as yours is? If the 2.25" inlet is a problem I think I might go with the N1 because it has a 60mm inlet which roughly equals 2" 3/8. Here is the address....
http://www.modacar.com/mitsubishi/frameset_mufflers_mitsu.htm

Yeah thats the one I have XTR type 7. Its the smallest of the XTR series (In person the other ones looked huge on the wall). And it has the 2.25" inlet which wasn't a problem. I like the XT series look better but they weren't out when I did mine. Down the road I will likely get the Tanabe racing medalion or 3" APexi cat back but no rush right now.