LAST EDITED ON 12-Nov-01 AT 11:41 PM (PST)

Im running basicly just a hahn stage 1 (i ordered a stage 1 from hahn, but adding my own FMIC...but thats besides the point right now)

Boost stays pegged at 5 lbs in 1st (automatic) and 1st half of second. near the top of second, boost starts to go to 8-9 pounds

the wastegate vacuum lines are perfect, zip tied and everything

i am running bascially open exhaust after the downpipe, thats the only thing i can think of that would cause the boost to go so high in top of second. im running no intercooler right now, so i really dont like it going that high, lol. Is the open exhaust why boost is going so high? anything else i should check?






http://www.asog.net/phantom/

Thats WAY TOO HIGH for no intercooler! Be careful. I have no idea what the problem is but I have seen it on the board before. I am sure someone knows. . .




http://hometown.aol.com/ohshootuhh/

All Motor Beast in need of MAJOR TUNING

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Nameless Cold Air Intake with a K&N Filter
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

I would start with putting an exhaust back on :)

MuRiX
97 Eclipse GS HRC Stage IV+
Sitting and collecting dust most of the time..
A.D.P.
http://www.murix.com

hehe, i would...if i could, lol.

the exhaust bolts are cross-threaded...so basically only 1 of the 2 bolts is the only thing holding it up, but theres like a 1"+ gap bewteen the downpipe and the cat.

instead of trying to muscle it, i figured it would just make me get my exhaust done sooner, lol

but does that sound reasonable? 3+ psi creep because of open exhaust?


http://www.asog.net/phantom/