| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | Help with 14b wastegate actuator |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=93042 |
93042, Help with 14b wastegate actuator
Posted by ameclipse, Jan-28-06 09:57 AM
Ok I have hooked up a t25 so i know about installing turbos a little. I just installed a 14b and was wondering were would i have the vac line for it go. There is no vac line on the compressor but on the compressor side the j-pipe has a vac outlet should i hook it up there. Thanks for the help.
Anthony
|
93044, RE: Help with 14b wastegate actuator
Posted by ameclipse, Jan-28-06 11:13 AM
also would i install my mbc between the jpipe and the wastegate?
Anthony
|
93048, RE: Help with 14b wastegate actuator
Posted by Blizare, Jan-28-06 05:10 PM
The pressure at the compressor is that same as at the intake manifold, so it doesn't really matter.
the mbc should be before the wastegate because your bleeding the pressure so that you trick the WG.
|