Where have you guys, that have done a custom kit, got decent piping from? We have a Star stage 1 with a Starion fmic and now just need to piece some piping together. I checked a local place for custom piping and they want $300, as expected. I'll spend that for nice custom piping after the motor needs rebuilt for more boost and a larger intercooler is in place.

Thanks.

You can usually get U-bends for cheap from local performance shops. Mine were $18cdn each for 2.25" u-bends of mild steel, I was actually going to run 2.25" for a cold pipe from the IC to the throttle body and 2" from the turbo outlet to the IC. Then you get an exhaust pipe cutter, this type of chain thing with a handle, and use that to trim everything and then tack it together with something.. and take it to a shop to get it better done.

http://cgi.ebay.com/ebaymotors/2-5-Intercooler-Piping-Pipe-Hond-Civic-Accord-Prelude_W0QQcmdZViewItemQQcategoryZ38634QQitemZ8026857789QQrdZ1

ther all over ebay with different sizes and colors, you can even get pieces with bov flanges already on!