What is 4an line? what size is it? i went to home depo and lowes and i could not find anyting. I found some refrigirator hose that was the metal braided kind with 1/4 inch fittings. Would that be ok to use?Also i looked around and i cant find any 4an line to buy online,,, is this someting that you have to make? Like buy the fittings and put them on a braided line? Can someone explain this to me? im trying to complete my oil system for the super 16g that i have, but no oil feed line so no turbo. Anyone?

www.jegs.com

www.anplumbing.com

you can get a kit for about 80 bucks on ebay for your turbo. i don't know about the turbo you are using but i hat to buy a flange for the oil input. it was only anothe 15 bucks. some turbos have a threaded inlet and you can go to napa or home depot and find what you are looking for.
http://cgi.ebay.com/ebaymotors/T3-T4-TURBO-OIL-LINE-FEED-KIT-TURBO-OIL-INLET-FEED-KIT_W0QQitemZ8025292375QQcategoryZ33742QQrdZ1QQcmdZViewItem
this is cool you might have to work on it a little. go to ebay and search for "turbo oil line" or something like that.

Originally posted by DarkOne
www.anplumbing.com

X2

hey would a -6an line be too much for an oil feed,,?If i can get it cheap,,, it was used for nitrous and he is selling it cheap.

If I had to guess, I would assume using nitrous line for your oil line woulnt be a good idea because nitrous line is designed to only carry the nitrous oxide gas thru it, so the line wouldnt be able to handle hot oil. Plus I think that's too small.

Feel free to smack me around if I'm wrong.

http://www.raceplumbing.com/product_info.php?cPath=21&products_id=172


all the hoses, and hose ends that you can ever ask for. me personally i went with the superstock hoses using the an size push locks. it hold great and i dont have to deal with cutting and pressing the stainless steel lines into the fittings. for the under body i have 6an hard aluminum lines with 6an pressure fittings