I bought a fmic and pipes, and have no instructions on how to install and im having trouble getting the upper ic pipe to fit, anyone have any advise or does anything need to be cut? moved? it seems like the ecu is in the way almost but before i go moving things i need to figure out what im doing, please help asap i need the car tommorow and thats the last project is the ic pipes.
-----------------------------------
97 RS-T, STAR Stage 2, Decah Lambo Doors, 19" Axis Hiros, Built 420a
-----------------------------------

You will need to cut a 3" hole in the body panel under the fuse/relay box under the hood. There is a wiring harness that runs through the panel, the hole that you cut will need to adjoin the harness hole. The IC pipe will hook to one of the 90* fittings as it comes through the hole. The other IC pipe will run out through the fuse/relay box bracket where the factory air intake was.

http://home.bendcable.com/optimuspeterson/instruc%206-10.htm

That should help too. Also where can i buy those dam 90 degree bends, i made my own for now but i should change it. Sorry to change thread.

ok so i got all the pipes connected except now im having trouble getting my fuse box back in, the pipes are making it sit to high and the mounting bracket had to be removed for the pipes to fit? how is this fixed?
-----------------------------------
97 RS-T, STAR Stage 2, Decah Lambo Doors, 19" Axis Hiros, Built 420a
-----------------------------------

You will just have to move the pipes around to get the best fit that you can. Also you may have to do some trimming on the fuse/relay box bracket so the pipes fit through it.

ughhhh....ok back to the damn sawing lol, damn i love the no cutting aspect of the star kit but the big fmic just looks so sexy :)
-----------------------------------
97 RS-T, STAR Stage 2, Decah Lambo Doors, 19" Axis Hiros, Built 420a
-----------------------------------