does anyone know of a good way to tap into a oil line for my t25 and how i can go about tapping the return line back into the oil pan?

Originally posted by 98dsmNT
does anyone know of a good way to tap into a oil line for my t25 and how i can go about tapping the return line back into the oil pan?

you should hit the search button is what you should do.


i don't feel like being an ass today though so just take out the oil pressure sending unit on the back of the black and use that hole to feed the turbo.

Oil drain from the turbo is done by cutting a hole in the pan and running a line from the turbo back to the pan.

I mean you should search cause you asked this vague ass question meaning you don't know jack shitty shit about a turbo system.

imo.

Originally posted by Blizare
meaning you don't know jack shitty shit about a turbo system. imo.

Oh, stop being so kind!

Originally posted by djtrickee

Originally posted by Blizare meaning you don't know jack shitty shit about a turbo system. imo.

Oh, stop being so kind!

I couldn't help it :shrug

Originally posted by Blizare
i don't feel like being an ass today

Originally posted by Blizare you don't know jack shitty shit about a turbo system.

Hey bliz did you ever end up using that bov I gave you?

Originally posted by Aggression
Hey bliz did you ever end up using that bov I gave you?

Sure did :thumbsup. It's on there right now. I really, REALLY love the whooosh sound instead of the ricer squeeeel. Thanks again J!

I believe you can order all the fittings you will need for the feed line from Hahn Racecraft. I would call them up and ask for the oil distribution block with the 4-an adaptor that screws into it. That way you will still be able to use your oil sending unit and you can run a 4-an ss oil feel line to your turbo. As for the pan, I'm not sure what type of line comes off of the T-25 or I would give you the fittings that you need. You will tap into the oil pan near the top of the pan though on a flat surface.

Just a word of advice...the oil feed fitting that screws into your center cartridge of your turbo...dosn't need to be that tight!

Originally posted by Aggression
Just a word of advice...the oil feed fitting that screws into your center cartridge of your turbo...dosn't need to be that tight!

LOL. Chalk that one up to experience right!