| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | fmu install | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=90856 |
90856, fmu install Posted by joeck76, Oct-24-05 03:50 PM
here goes a question i could not get an answer on, i have a fmu and a walbro255 i read al the posts on the sfmu installs and i couldnt find what i was looking for, is it possible to fit the fmu in somewhere without adding any lines? i seen where someone mounted it under the car but cant find the post, also alot of posts have a fpr added, i plan on keeping stock one, and another thing alot of posts have another fuel filter is this really ness? and why? tryin to wrap this project up and just would like the quickest simplest way to hook my fmu into my system any help will be great thanx joe
|
90857, RE: fmu install Posted by DarkEclips96, Oct-24-05 03:55 PM
http://dsmtuners.com/forums/showthread.php?p=1509962#post1509962 Pictures are in there.
I just zip tied mine there in a tight spot for now till I can get to raise the car up and drill in a place where I want. Just mount it somewhere near the stock fuel filter now so the return line stays short. You will only have to run a vacuum line up to the engine bay then. Also you dont need another fuel filter, I suggest just changin stock one out for a new one if you havent lately.
|
90858, RE: fmu install Posted by eclipse982nrRST, Oct-24-05 04:05 PM
you need to use your stock fpr and fuel filter assembly with the regular fmu. the sfmu uses a different setup with a different fuel filter and no stock fpr. if i remember correctly, which i think i am wrong cuz i dont remember exactly from when i had an fmu, but, mount your fmu in the rear by the stock fpr. take off the top line and connect it to the side of your fmu, then run a new line from the bottom of your fmu to the that piece you took off. then just run a vac line to it, and your done, I THINK, lol.
someone correct me if i am wrong.
|
90859, RE: fmu install Posted by joeck76, Oct-24-05 04:23 PM
you guys both rule!!! thanks alot i thought i could do that but wasent sure and wanted to hear it from the pros:thumbsup
|
90860, RE: fmu install Posted by eclipse982nrRST, Oct-24-05 04:38 PM
Originally posted by joeck76 you guys both rule!!! thanks alot i thought i could do that but wasent sure and wanted to hear it from the pros:thumbsup
haha thanks, give us some points then...
good luck with your install...
|
90863, RE: fmu install Posted by djtrickee, Oct-24-05 05:38 PM
Originally posted by joeck76 and wanted to hear it from the pros
Lol... yea. scary. :wary
Originally posted by eclipse982nrRST haha thanks, give us some points then...
-2 for begging. You beg more than a fucking crack whore on the local street corner.
| |