does anyone have a pic of where exactly on the fuel rail i have to run the supply line for the sfmu from? i couldn't find any pictures that i could see it in and i'm trying to make this as easy as possible tomorrow btw i have looked at the installing sfmu write up but those pics just weren't clear enough for me....TIA

What year?

96+

Originally posted by cs82685
96+

take the scrader cap off yoru fuel rail and i believe the thread is a -4AN, just run a line from that to sfmu.

yeah i got that much, i was just lookin for a pic cause theirs so much in that area and trying to look when its almost dark out wasn't helpin

I don't have a pic handy, but I can tell you right where it is. Look at your intake manifold. Follow it to the left (passenger side). There is a sensor monuted on it or a Missing Link, depending on what you have. Just below that sensor, mounted on the intake manifold is the fuel rail. The schrader valve he ^^^ was talking about is right there on the end of the rail. It needs to be removed and you can run a line from there to your regulator. Make sure you release your fuel pressure or it will leak quite a bit. If you have cruise control you might have move some of that crap to work in there better. Hope that helps.

its not that hard to see man, just look at the end of your fuel rail and you will what looks like a tire cap or bicycle tire cap. release your fuel pressure first, take off the valve, and thread your -4an line on it.

thanks guys for, some reason i interpreted the install wrong so i thought it was on the drivers side which is why i couldn't find it