| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | CEL turned off but still have an error code? | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=87605 |
87605, CEL turned off but still have an error code?
Posted by WickedESi, Jul-02-05 10:27 PM
I've had a check engine light for a "System too rich" code (I have 450's, and don't want to drive around w/ lower than 16 psi of idle/static fuel pressure). My ltft is maxed out (-25), but my stft is in check (around -10). My check engine light stopped lighting up for this error code, but it still pulls up if I check my errors. It's not burnt out either because it lights up for the ignition start up check. Is it normal for it to stop lighting the CEL after a while?
|
87606, RE: CEL turned off but still have an error code?
Posted by DarkOne, Jul-02-05 10:33 PM
If the problem isn't detected for two key-on trips that meet certain criteria, the CEL turns off but the code remains stored for another X amount of key-on trip sequences. Eventually it'll go away.
|
87607, RE: CEL turned off but still have an error code?
Posted by WickedESi, Jul-02-05 10:45 PM
Cool, thanks!
| |