You guys with the flex-a-lite fans, how did you mount it. I'm having problems with the brackets so I guess I will have to make custom brackets. I went to home depot to find brackets, but I couldn't find anything I can use. Please post some ideas. Thanks

honestly? i just used black zip-ties thru the factory bolt holes on the radiator. two per hole. they have lasted over a year without signs of wear or decay!

For our V6 turbokits, space is very limited. We completely remove the stock fans, and use 2 universal FAL 12inch PUSHER fans, and mount them in front of the AC condensor/radiator. We have had no major overheating issues with this setup. Steve (owner) has been using this design for over 3 years, and we've found that there is no better way of doing it. Here's a picture of an Avenger with our setup.

EDIT: This also leaves room for many things. IE: Bigger turbo/downpipe etc


Hope this helps
Chris

i used big washers and bolts that i went to lowes and got and mounted them to my fluidyne