| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | 450 DSM injectors help |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=86419 |
86419, 450 DSM injectors help
Posted by tim96rs, May-30-05 07:01 AM
Sould they be really hard to get in the intake? The 310 I put in went in easy. HELP
|
86423, RE: 450 DSM injectors help
Posted by ner947, May-30-05 09:17 AM
The 450 cc/min stock DSM injectors will supposely fit, but they are a very tight squeeze. I tried to install a set once, but I couldn't get them in. I heard that you need to squeeze them in with the stock-sized O-rings but I wasn't able to do it, I kept thinking I was going to break something or pinch one of the O-rings. Good luck...
|
86428, RE: 450 DSM injectors help
Posted by tim96rs, May-30-05 11:43 AM
Yeah I know. Got them in the fuel rail but not the intake thanks
|
86433, RE: 450 DSM injectors help
Posted by Star Turbo Talon, May-30-05 03:28 PM
the ones i installed had no problem with the intake, the rail was tight. you didnt let oil soak on the o-rings overnight or for long hours did you? causing them to swell up.
Terry
|
86442, RE: 450 DSM injectors help
Posted by UDLUZE, May-30-05 05:34 PM
They will be really tight going in both intake and rail, but they will fit. I put a little oil on all the o-rings and installed the injectors in the rail first. Then I fought like hell to get them pushed into the intake, but they will go. It can be very frustrating.
|
86465, RE: 450 DSM injectors help
Posted by tim96rs, May-31-05 11:34 AM
thanks for all the help. I got them in.
|