Murix or someone, where is the idle air controller usually mounted at, I recently obtained the EMIC shop manuals, or if not, a very good tuning aid for the DFI, but first I am stepping myself through the installation process to verify that everything has been installed that is supposed to be there, sensors, wires, etc... Then hopefully I will find out why some of the sensors are not functioning... Thats what I hate about buying a car that someone else has worked on, you never know what kind of a person they were...mechanically...

As far a the EGR is concerned, is there a performance difference between having it hooked up or having it ripped out and welded shut? I will probably never pass emmisons ever again in this car anyways, so dont let that sway your oppinion.






--
Brad Rickard
98 GS HRC Stage V (nuff said)

The IAC (or ISC, or idle air servo, or whatever..) is located on the back of your throttle body. There are only two sensors back there: the throtle position sensor, and the idle speed control motors. The IAC is the sensor on the bottom.

_____________________________________________
-Dino Yancey
I'm so bad, i should be in detention.


For Mitsubishi Technical Manuals, INCLUDING the 97-99 electrical and service manuals, ckick HERE:
http://www.heavenz-not-0verflowing.com/files/