| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | SAFC, Worth it if you have the SFMU w/ bleed valve? | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=85420 |
85420, SAFC, Worth it if you have the SFMU w/ bleed valve?
Posted by Semperboost, Apr-30-05 03:23 PM
I have the SFMU (2.72 disk/ dark spring) with the bleed valve and 30lb injectors. I idle smoothly at 20 psi. I've adjusted my bleed valve to about 5:1 gain. Question is do I need the SAFC? I've heard it's for people running larger injectors to adjust for idle, but I don't have that problem. I know the bleed valve is for major and the SAFC is for fine tunning, but will I get any major gains from it if I've already set my fuel pressure curve? THanks
Alvin
http://www.cardomain.com/id/96rst
|
85421, RE: SAFC, Worth it if you have the SFMU w/ bleed valve?
Posted by eclipse982nrRST, Apr-30-05 04:33 PM
i have my afc hooked up with my sfmu and 440 injectors mainly to just lean out my idle so i dont burn out my o2 sensor and puff black smoke at idle :) i idle smoothly fine without the afc, but its going to help out a lot more in the long run to tune at higher rpm's let alone the idle imo.
|
85557, RE: SAFC, Worth it if you have the SFMU w/ bleed valve?
Posted by Semperboost, May-03-05 04:16 PM
bump?
Alvin
http://www.cardomain.com/id/96rst
| |