Run stock 4g63t 440's in their 420a with radioshack resistors??

If so how has it went?

What options do I have?

I just want to know I have a friend that is going to give me a mint set of them and I want to run them, but if not I'll just buy some that plop right in.

thanks

They work fine, Ive known a few people that used them. But you still need something to control them like and afc/sfmu or ms n such.

They are too big for the ecu to handle. So if you can get some cheap and run the resistor mod ur golden...

Nick
97RS


THX KAPTAIN MYKE FOR HOSTING! www.kaptainmyke.com

Originally posted by ScreaminE
Run stock 4g63t 440's in their 420a with radioshack resistors?? If so how has it went? What options do I have? I just want to know I have a friend that is going to give me a mint set of them and I want to run them, but if not I'll just buy some that plop right in. thanks

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=26&topic_id=148&mesg_id=148&page=

You...

Things We've Seen Before...

Read...

Now...

Okay thanks...

But still ?'s

Can I just buy these resistors: http://www.radioshack.com/product.asp?catalog%5Fname=CTLG&category%5Fname=CTLG%5F011%5F002%5F014%5F004&product%5Fid=271%2D132

and splice the ground wire them in the ground?

is it that simple?

The 4g63 does not use 440's.........they use 450's. and they work fine with supporting mods. I have a harness and injectors prewired and ready to install if your interesed. Plug and play for the most part. you will need a sfmu and AFC.

Terry

DSM 450s will work fine in the 420a with a sfmu. Just wire them up with a resistor box from a late 80s, early 90s honda. Heres a link to help with that. http://www.neons.org/forums/viewtopic.php?t=86343&highlight=wiring+resistor+box+dsm+450s

what about with a standard FMU?

thanks for the link

hey, also have a custom 14b, (16g now) and also have a set of 450 injectors that i want to install...i was confused on the writeup from mr. slick, that neon one is pretty nice...anyone know exactly what kind of honda/acura engine uses that....and whats it actually called (for autozone lookup purposes)... thanks
doug

you can also use turbo 4g63 resistor pack. any honda with a resistor pack should work. 89-91 i know has the same one shown in the picture of the neon page.

Terry