for you "budget" typpe guys.....buy/or copy this :P

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4533252119&category=6755

Hold still while I bludgeon you Blizare.

ok i just brought it. thanks for lookin out blair :P

for $50usd + shipping I could put a 14B flange on the manifold I already have :D and 14B > T25

Wow.

Some poor sap out there is gonna think he'll push 500 WHP with a T-25 too. :( You almost feel bad for them.

Brian

Originally posted by ForceFed420a
Wow. Some poor sap out there is gonna think he'll push 500 WHP with a T-25 too. :( You almost feel bad for them. Brian

i dont. i laugh at their stupidity. yes, im heartless at times.

When they go to take the stocker off they'll be like, "hey, wait a minute?" HAHA, I can see it now..

Originally posted by BumpinTalon
for $50usd + shipping I could put a 14B flange on the manifold I already have :D and 14B > T25

WHy? a 14b will BOLT UP to a stock manifold.

i thought you had to put a flange on it...

no, now hold still while i bludgeon you repeatedly with this:

Originally posted by DarkOne

Originally posted by BumpinTalon for $50usd + shipping I could put a 14B flange on the manifold I already have :D and 14B > T25

WHy? a 14b will BOLT UP to a stock manifold.

fitting more then just two bolts helps with peace of mind

Originally posted by BumpinTalon

Originally posted by DarkOne

Originally posted by BumpinTalon for $50usd + shipping I could put a 14B flange on the manifold I already have :D and 14B > T25

WHy? a 14b will BOLT UP to a stock manifold.

fitting more then just two bolts helps with peace of mind

I'd rtather have two bolts holding it on that have Joe Blow try to attach a steel flange to cast iron with his $200 wire welder.

If you're going to use a stock manifold, use a stock manifold. Trying to weld a flange to it is stupid.

Originally posted by DarkOne
If you're going to use a stock manifold, use a stock manifold. Trying to weld a flange to it is stupid.

that was my thoughts when i posted this.
I would nevar do this.....but there was a thread last week so.......

Originally posted by DarkOne

Originally posted by BumpinTalon for $50usd + shipping I could put a 14B flange on the manifold I already have :D and 14B > T25

WHy? a 14b will BOLT UP to a stock manifold.

are you serious? i have a 14b sitting in my garage at home collecting dust that i could use if you can in fact use a 14b on the stock manifold.

Originally posted by injendsm

Originally posted by DarkOne

Originally posted by BumpinTalon for $50usd + shipping I could put a 14B flange on the manifold I already have :D and 14B > T25

WHy? a 14b will BOLT UP to a stock manifold.

are you serious? i have a 14b sitting in my garage at home collecting dust that i could use if you can in fact use a 14b on the stock manifold.

with 2 bolts greg.

Originally posted by Blizare

Originally posted by injendsm

Originally posted by DarkOne

Originally posted by BumpinTalon for $50usd + shipping I could put a 14B flange on the manifold I already have :D and 14B > T25

WHy? a 14b will BOLT UP to a stock manifold.

are you serious? i have a 14b sitting in my garage at home collecting dust that i could use if you can in fact use a 14b on the stock manifold.

with 2 bolts greg.

haha sweet. maybe i will boost my eclipse after all.

do EEEEET!!!

haha. but now ya have to get another sidemount :P

While you're in there, you should do a 4g63 engine swap. Fits about the same.

Originally posted by injendsm

Originally posted by DarkOne

Originally posted by BumpinTalon for $50usd + shipping I could put a 14B flange on the manifold I already have :D and 14B > T25

WHy? a 14b will BOLT UP to a stock manifold.

are you serious? i have a 14b sitting in my garage at home collecting dust that i could use if you can in fact use a 14b on the stock manifold.

did you not look at this?

you need a bludgeoning too!

Originally posted by 97whitESi

Originally posted by injendsm

Originally posted by DarkOne

Originally posted by BumpinTalon for $50usd + shipping I could put a 14B flange on the manifold I already have :D and 14B > T25

WHy? a 14b will BOLT UP to a stock manifold.

are you serious? i have a 14b sitting in my garage at home collecting dust that i could use if you can in fact use a 14b on the stock manifold.

did you not look at this? you need a bludgeoning too!

yea it's UGLY, but Function over Form, I always say :P

Originally posted by 97whitESi

Originally posted by injendsm

Originally posted by DarkOne

Originally posted by BumpinTalon for $50usd + shipping I could put a 14B flange on the manifold I already have :D and 14B > T25

WHy? a 14b will BOLT UP to a stock manifold.

are you serious? i have a 14b sitting in my garage at home collecting dust that i could use if you can in fact use a 14b on the stock manifold.

did you not look at this? you need a bludgeoning too!

nope. i did a little searching tho and saw that you have to remove the ac so im gonna say no to that idea. its too damn hot in fl to live without ac.

Originally posted by injendsm
nope. i did a little searching tho and saw that you have to remove the ac so im gonna say no to that idea. its too damn hot in fl to live without ac.

Could always just turn it the other way... ;-)

Originally posted by injendsm
its too damn hot in fl to live without ac.

and too damn boring without a turbo :P

EDIT: YAY 6006 posts.

lol. newbs pfft :P