Okay tell me what you think of this Kit...I already have the bottle and all I would need is the switches...What else would I need to make this a safe setup on my car? But mostly I want your opinion on this Kit. Thank you

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7944567463&category=33740

And could someone PLEASE OH PLEASE tell me if this picture in my sig is workin?

You'll need a toggle switch, maybe some wire, a few connectors and whatever other goodies you might wanna add (purge, warmer, etc).

Hopefully it will come with all the parts you'll need for install. I suggest getting a schrader valve core tool and running the fuel from the rail itself. Very easy. Goodluck.

EDIT: Sig works. :thumbsup

Those 12inch aeroquip lines are pretty short but it will work. Are you just looking for a basic kit? Also looks like you will need all the wires.

ok, my 56k is taking too long to get to the damn ebay site...so ill just put out a blanket of info for ya. basically all that is needed for a nitrous kit is a fuel solenoid, nitrous solenoid, around 16 feet of -4an braided ss line. 2 -4an fuel lines (one going to the "in" side of the solenoid, and the other going to the nozzel),
1 shorter -4an nitrous line, relay, toggle switch (arming), momentary or WOT switch (spray), the APPROPRIATE jets, your nozzle, and your bottle w/ brackets. thats all thats included in any nitrous system. only things im leaving out are things like brackets or hose clamps.

other accessories include pressure gauge, heater, purge, remote valve.

EDIT: finally got it to load...pretty good i guess. if infact everything is new. i got my kit basically new with bottle for only about 100 more...so depends on what you want.