| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | need help with code 1296 |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=80397 |
80397, need help with code 1296 Posted by spool, Dec-13-04 05:48 AM
well recently had some prob with the car randomly shutting off,got check engine light..went to autozone and got code p1296,check this forum under PCM (Comuter) Error Codes and no luck..whats this code mean and how do i fix it..
|
80399, RE: need help with code 1296 Posted by DarkOne, Dec-13-04 06:16 AM
What year is your car?
|
80400, RE: need help with code 1296 Posted by spool, Dec-13-04 06:27 AM
96 eclipse(hrc stage 2 with built bottom end)and stock everything else..found out its a map sensor code,but i replaced it with a new one and its still die randomly.i search and some people have this prob using the safc or hrc black box.i don't have the safc but i am using hrc black box and missing link.
|
80402, RE: need help with code 1296 Posted by DarkOne, Dec-13-04 07:24 AM
Do the key dance instead. Give us that code, and I can more accurately diagnose your problem.
Any other symptoms? "It dies randomly" could be anything.
|
80403, RE: need help with code 1296 Posted by mcgyvr, Dec-13-04 07:36 AM
its no 5 volts reference to the map sensor.
check all connections to the black box and the map sensor, your reference wire is disconnected somewhere
|
80442, RE: need help with code 1296 Posted by Star Turbo Talon, Dec-14-04 06:47 PM
Originally posted by mcgyvr its no 5 volts reference to the map sensor. check all connections to the black box and the map sensor, your reference wire is disconnected somewhere
yup....better yet get rid of the black box. you have a missing link. try it then and see what happenes. I thought there was a memeber on this board that the black box shorted out on him.
Just a shot once you get it to run. My 96 ran turboed for 2 years no missing link and no black box. No idea why, try it, worst you will have to do is intall a ML or FCD and reset the ECU.
Terry
96 Eagle Talon ESI....Daily driver
97 Eclipse.........
|
80452, RE: need help with code 1296 Posted by turbo8u, Dec-15-04 05:54 AM
i had that code when i had an SAFC...took it out and it went away.
take out your black box, and check the wire to the ECU for the map sensor, its yellow with a black stripe...likely its shorting out somewhere or the connection is fubar somewhere along the line
|
80462, RE: need help with code 1296 Posted by spool, Dec-15-04 08:04 AM
i took out the hrc black box and reseted the ecu and it went away,So far so good.
|
80485, RE: need help with code 1296 Posted by Star Turbo Talon, Dec-15-04 12:37 PM
Yup like turby said i had the same issue with my SAFC, the same reason i remove it. some 96+ ECU's wont deal with it. Now the FCD i made doesnt give me codes, not sure why the Hahn would it really does the same thing i am sure, but others have noticed the problem too. At any rate good job.
Terry
|