i spoke with lori today and she says my kit is ready to be shipped as soon as i pay for it, haha. so i gotta send them the cash tomorrow. my question is this...how long were you guys stage one hahn installs? 1 day (10 hours), 3 days?

I'm looking at my partial kit (no fuel system, and oil return line), and the turbo itself wouldn't be more than 5 hours for a stage two if you are mechanically savvy and you work straight through. Fuel system, might want to spend some time with that since the directions are a bit on the foggy side.
I just hope the old parts are not rusted on there. If so, i would give all bolts visible a quick squirt of liquid wrench the night before.
Make sure you have all of the tools (mainly a deep socket
1 1/16", and o2 sensor socket , gaskets, sealent, hoses and lines before you start.

read the instructions carefully (atleast 3 times) before you start taking shit apart.
I hope this helps. If you have anyother question, check out Corbins page. He's got some good advice. otherwise I'll be going through the same shit you'll be doing pretty soon.
I still haven;t figure out how the fuel system hooks up...:o(

kaiser
soon to be HRC equipped...

LAST EDITED ON 05-Sep-01 AT 04:40 AM (PST)

two days max if you have all the tools and an assistant (and dont break anything crusial). Since you have a 95' it should be simular to my install (and easier than 96up models thank god).


http://stan2gnt.homestead.com/home.html
Stan2gnt
Stan2va@aol.com
95 Talon 420A-Turbo
Former and future nitrous user

2 days...no assistant. (many bruised, cut, and bleeding hands later...) (let's not forget the countless expletives!)

Have fun!

Jason
98' Eagle Talon ESi-T
Mitsu Super 16g Turbo(HRC)/Custom FMIC


http://springfielddsm.homestead.com/JasonsPics.html

Good luck with it. You need to bring it up to Atl one of these days. Also go to se-dsm.com since you are in the area.

MuRiX
97 Eclipse GS HRC Stage IV+
Sitting and collecting dust most of the time..
A.D.P.
http://www.murix.com

took several days... mainly because i hda to keep running out for tools i didnt have (oil sensor, o2 sensor sockets, etc)... and no assistant.. and no floor creeper! oh my back was killing me for that one.. also, i spent FOREVER on the fuel system.... i take long since i quadruple check everything. if i had to do it again, maybe a day. after gettting some phone and online help i got the fuel system figured out.