Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectIf it's not one thing it's another. (rant)
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=79268
79268, If it's not one thing it's another. (rant)
Posted by nosdeclipse, Nov-14-04 08:03 AM
Well, finally after putting 1,000 miles on the rebuilt motor I decide to hook everything else up to run the turbo. I go and put the ss line from the primary rail to the secondary rail. I turn the key to turn on the pump, got fuel pressure and no leaks, good. When I try to turn the injector so I can get to the plug for the injector harness, fuel starts spraying all over the place. So now I have to pull off that damn secondary rail and make sure the o-ring seated properly. What a pain in the ass. I'm just getting disgusted with this already.
79269, RE: If it's not one thing it's another. (rant)
Posted by grain, Nov-14-04 08:15 AM
dont turn the injectors then. or should have lubed them before installing.
79271, RE: If it's not one thing it's another. (rant)
Posted by nosdeclipse, Nov-14-04 08:21 AM
i did lube them. That one just must not have seated right. I had to turn it to get to the plug on it.