| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | rebuild time? | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=78935 |
78935, rebuild time? Posted by jwhit, Nov-04-04 12:27 PM
I have a 98 talon that has already been rebuilt once for piston ring failure. I have a hrc stage 2 with je pistons, crower rods, total seal rings, farrea valves and crane valve springs and retainers. Anyways I have been getting some blowby and my 1 qrt catch can will fill up about every 1000 miles, depending on how I drive it. The other day oil started spraying from my turbo, appearantly from the drain tube gasket, all over my engine bay. I know serious blow by can couse this but if my blow by was that bad, wouldnt I be burning oil too. My engine produces no smoke, and I have searched and yes, there is no kink or blockage in the drain tube. I thaught my valve seals were just leaking and causing some blowby under boost, but all this oil sprayed out when I was driving normally down the freeway. Sorry for the long post. THanks
|
78939, RE: rebuild time? Posted by SilverBullet20g, Nov-04-04 01:14 PM
I have heard from others that the Total Seal rings cause a lot of blow by... Just a thought, not facts..
|
78968, RE: rebuild time? Posted by xtrickedeclipsex, Nov-05-04 06:25 AM
Total seals will burn oil. I dont have any blow by. ---------------------------------------
 "Oh yea, well...My manifold does cool twisty things"
www.EnhancedMotorSports.com
|
78973, RE: rebuild time? Posted by tim97rs, Nov-05-04 10:36 AM
Originally posted by xtrickedeclipsex Total seals will burn oil. I dont have any blow by.
BINGO!!!!!!!! that is the problem i have....i have been wondering where in the hell my oil keeps going. loose about a 1/2 to 1 qt every 2 months or so, and nothing in my catch can!!!!!!
| |