Going back to the dyno on Thursday.

Race gas will be used to get me to 27lbs of boost. Im going to tune the timing and the cam gears. Im expecting to see at least 400whp.

Wish me luck!

How much octane? Torquefreaks was telling me that they will run 114 when they build my MAP with race gas... Do you still get a huge amount of timing problems at WOT with the stock PCM and the portfueler? I know you can ajust with the cam gears.. I wish you luck...

Originally posted by SilverBullet20g
How much octane? Torquefreaks was telling me that they will run 114 when they build my MAP with race gas... Do you still get a huge amount of timing problems at WOT with the stock PCM and the portfueler? I know you can ajust with the cam gears.. I wish you luck...

110 at least. i dont have any timing problems currently. hrc doesn't have timing problems either as long as race gas is used. ignition timing and cam timing are different.....

27 pounds....Be careful, dangerous territory..good luck with the 400
---------------------------------------

"Oh yea, well...My manifold does cool twisty things"

www.EnhancedMotorSports.com

Good Luck.

good ole alcohol/water injection thread below this one.

Good luck, please take some video if possible.

--Kurt

Originally posted by KTECLIPSE
Good luck, please take some video if possible. --Kurt

ill try and get the camera

Originally posted by siueclipse

Originally posted by KTECLIPSE Good luck, please take some video if possible. --Kurt

ill try and get the camera

that would be first on MY list if i was gonna go roll 400whp... :shrug

well, i have to borrow it from a buddy. can't get it all the time.

Originally posted by siueclipse
well, i have to borrow it from a buddy. can't get it all the time.

go to a gas station and get a digital disposable one :shrug

good luck on the numbers though man.

or since you own a couple companies, hit the piggy bank and just buy a cheap $100.00 digital camera from wally world so you never have to worry about this whole camera thing ever again! :P

ive been meaning to buy one.. just haven't.

When are you going with a larger turbo? ;)

haven't decided yet.

the car just got sponsored, so maybe soon.

I would recommend you take video, because your honesty on this board is not the best. Why wouldn’t you take video, it’s a big mile stone with a 420a. Something to show your kids, lol :thumbsup
---------------------------------------

"Oh yea, well...My manifold does cool twisty things"

www.EnhancedMotorSports.com

Have you considered water/methanol injection to aid in the quest of the 400WHP mark?

Originally posted by TXTurboGS
Have you considered water/methanol injection to aid in the quest of the 400WHP mark?

no

Originally posted by xtrickedeclipsex
I would recommend you take video, because your honesty on this board is not the best. Why wouldn’t you take video, it’s a big mile stone with a 420a. Something to show your kids, lol :thumbsup

ive posted a dyno sheet.

Take some video!

i have had a digital camera since like middle school or some shit? not to knock you... but damn, if you can get every trick mod in the book.... i am sure someone on here has a few old 2mp digi cam's on here they will just give you, lol

wow guys, stop sweatin him about all this.

just post some dyno sheets when your all done and call it a day. a camera isnt the first thing on your mind when you go to the dyno.

Originally posted by soulcontroller
wow guys, stop sweatin him about all this. just post some dyno sheets when your all done and call it a day. a camera isnt the first thing on your mind when you go to the dyno.

yeah.. not blowing the motor is my first thing..

well, i dont think im going to make it to the dyno on thursday. its probably going to be next week sometime.

what? :wtf


I guess I can't complain...My 420A has been parked at the dyno for months now waiting for the tuning and the stupid wiring..

Hopefully we will see what WHP our 20Gs can do

well.. my thermostat housing is cracked. a local place is trying to fix it, buteven if i do get the car running tonight, i dont want to immediatly put it back on the dyno from doing a head gasket change. i need to drive it around a little first.

Originally posted by siueclipse

Originally posted by xtrickedeclipsex I would recommend you take video, because your honesty on this board is not the best. Why wouldn’t you take video, it’s a big mile stone with a 420a. Something to show your kids, lol :thumbsup

ive posted a dyno sheet.

Yes. Granted. But in your situation, video would be MUCH better.
---------------------------------------

"Oh yea, well...My manifold does cool twisty things"

www.EnhancedMotorSports.com

Originally posted by xtrickedeclipsex

Originally posted by siueclipse

Originally posted by xtrickedeclipsex I would recommend you take video, because your honesty on this board is not the best. Why wouldn’t you take video, it’s a big mile stone with a 420a. Something to show your kids, lol :thumbsup

ive posted a dyno sheet.

Yes. Granted. But in your situation, video would be MUCH better.

im not in any situation. quit being a punk.

Please just post the sheet after you go to the dyno. No more of this back and forth squabbling. For future reference just post whatever you have after your session without a "going to" post. Hopefully it will prevent this sort of crap. Thread locked.

PS. 4th gear pulls. :)