Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectStillen Short Throw Shifter Help Needed
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=7853
7853, Stillen Short Throw Shifter Help Needed
Posted by brickardius, Jul-25-01 09:11 AM
I am having problems with my shifter after about 1.5 yrs of use. I was driving back fr om getting a pack of smokes today and when I was pulling into my sub-division, I couldnt shift 1st or 2nd gear, just 3rd and 4th and reverse.... I found a pin when I took the center console apart, but I cant find out where it goes. Does anyone have the install manual or have had the same prob? It shows rub marks on the base of the unit like its off track somehow?
Any help is much appreciated,
Brad
98 T-GS
7854, RE: Stillen Short Throw Shifter Help Needed
Posted by guest, Jul-25-01 10:34 AM
The pin goes to the left bottom of the shifter. It holds it on the bar that runs to the front of the car. Should be a little hole where it is supposed to go.

DAVE_FL
97 T-GS
HRC stage 2 (got my parts just have to install them)

Orlando DSM www.orl.dsm.org

7855, RE: Stillen Short Throw Shifter Help Needed
Posted by brickardius, Jul-25-01 11:20 AM
Here's some pics if someone see's something i'm missing....








7856, RE: Stillen Short Throw Shifter Help Needed
Posted by brickardius, Jul-25-01 11:22 AM
whoops, sorry about the wheel pic.... inserted wrong pic.
7857, Might be your clutch
Posted by Semperboost, Jul-25-01 01:09 PM
If you have a hard time shifting and/ or shifting at hi rpms it could be a sign that your clutch is going out...just a guess.

Alvin C.
USMC
7858, RE: Might be your clutch
Posted by brickardius, Jul-25-01 01:45 PM
Well, its not that I dont think... because I can shift 1st and 2nd, but I have to force it into place, it used to slide right into gear perfect then all of a sudden, no warning, just messed up... Plus, I just installed a new HRC stage V clutch not 3 months ago... Ohh well, I'll fool with it until I get it right..
--
brad
98 t-gs
7859, No!! Just lower your car some more!
Posted by fastdsm, Jul-26-01 01:29 AM
See? Here's proof right here:http://www.2gnt.com/dcforum/DCForumID25/1946.html
Lowering your car DOES HELP shifting, so there:(


7860, RE: No!! Just lower your car some more!
Posted by brickardius, Jul-26-01 02:03 PM
If I put it in reverse, you can feel it bind up and then all the gears are real tight to shift... expecially 1st and 2nd... then if i fool with it a little I can get it out of the bind and it'll be ok.... wierd huh?
--
brad
98 t-gs
7861, RE: No!! Just lower your car some more!
Posted by fastdsm, Jul-27-01 12:51 AM
You probably want to check your cable guides, sometimes they pop out of place and can cause similar symptoms.
7862, RE: No!! Just lower your car some more!
Posted by brickardius, Jul-27-01 06:36 AM
Ok, I'll check, are you talking about the guides right by the shifter? The one closest to the shifter looks crooked, but I dont see how to make it stay in place?? You can see in the pics above that its crooked and thats my prob, but i dont know how it did that all of a sudden or how to fix it :-(
--
Shiftin' hard :-(
Brad
98 t-gs