I wanna get an EGT guage before I do anything else and I was wondering what kind some of you guys have and how much they cost. Also did you guys tap into the manifold or the downpipe? Is one place better than the other, Since ive got the hahn kit id rather tap into the manifold instead of the downpipe. Thanks

Dave

Manifold, 100% Anywhere else, don't trust your readings.

I have the old autometer gauge/probe combo that they don't sell any more. They went with a sweep style design that actually looks a lot nicer (Shaun has one, it's nice) But last i looked, they were in the $200 range. You can try Westach. Their gauges aren't as "showy" as an autometer, but they're inexpensive and quite accurate from what i hear. There are several guys on the board that use them.

http://www.newedgeracing.com for a full catalog of AutoMeter gauges
http://www.westach.com for the westach gauges and probes.

_____________________________________________
-Dino Yancey
I'm so bad, i should be in detention.


For Mitsubishi Technical Manuals, INCLUDING the 97-99 electrical and service manuals, ckick HERE:
http://www.heavenz-not-0verflowing.com/files/

I have an autometer sport comp (bought used) but autometer sells a new street performer series for about $120. the probe is the same as I have except it has a SS strap included (God knows who would use it) to help mount it. Its quick if nothing else but I'd go for something that reads higher than 1600deg like the greddy or Apexi gauges. Not that you want to go beyond 1600deg but if you are you might like to know by how much. 1630deg you might stand on the gas anyway. 1700 you probably wont. I would have no way of knowing.

Since I cant use photopoint IMAGINE THIS:
Star turbo with E-trim and HKS BOV
Starion FMIC/2.5" piping
Joe P MBC
Apexi SuperAFC
Ross Pistons/total seal rings
Ported and matched intake manifold
AFX 55mm TB, FMM and UDP
2.5" downpipe back exh/Hayame muffler
Crane wires/Denso Iridium plugs
Centerforce DF clutch
KYB AGX struts/ST springs, UPR FSB, F&R camber kits
17" ADR lightnings/toyo FZ4 215/45/17
97' eclipse front end/projectors
Autometer gauges
Panasonic head unit/ Sony X-over
MB Quarts all around/JL stealth sub
Hifonics/MTX Thunder amps
XX brand alarm/Varad hyper green led

Stan2gnt
Stan2va@aol.com
95 Talon 420A-Turbo
Former and future nitrous user

Westach here. The guage isn't fancy at all, but it does go to beyond 1650 degrees as Stan mentioned as a nice feature.

It's also known for its accurate and quick readings while being cheap. Cost about 70-80 bucks for the probe and guage.

If you're into indigo-type looks and other bonus aethetical features, this one isn't for you.

Jason
98' Eagle Talon ESi-T
Mitsu Super 16g Turbo(HRC)/Custom FMIC


http://springfielddsm.homestead.com/JasonsPics.html

And whats the use of this crazy shit?












KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Ported Intake Manifold
Ported Throttle Body
Custom 2 1/4 inch exhaust
Empty Catalytic Convertor
225/50/16inch Wheels and Tires

That ones for a 3cyl geo metro as noted by the 3 channels and only a 1400deg range. If only it looked better, had 4 channels and read higher that shit would be the bomb. Due to the asthetics I rather blow my engine before mounting one but I guess they probably look good and "classic" to somebody.

Since I cant use photopoint IMAGINE THIS:
Star turbo with E-trim and HKS BOV
Starion FMIC/2.5" piping
Joe P MBC
Apexi SuperAFC
Ross Pistons/total seal rings
Ported and matched intake manifold
AFX 55mm TB, FMM and UDP
2.5" downpipe back exh/Hayame muffler
Crane wires/Denso Iridium plugs
Centerforce DF clutch
KYB AGX struts/ST springs, UPR FSB, F&R camber kits
17" ADR lightnings/toyo FZ4 215/45/17
97' eclipse front end/projectors
Autometer gauges
Panasonic head unit/ Sony X-over
MB Quarts all around/JL stealth sub
Hifonics/MTX Thunder amps
XX brand alarm/Varad hyper green led

Stan2gnt
Stan2va@aol.com
95 Talon 420A-Turbo
Former and future nitrous user

I guess you could use 2 double EGT gauges and have an EGT for each cylinder.



KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Ported Intake Manifold
Ported Throttle Body
Custom 2 1/4 inch exhaust
Empty Catalytic Convertor
225/50/16inch Wheels and Tires