Well tomorrow im finally going to be able to put in the port fueler. I cant wait. Tonight I spent time installing a new greddy profec b spec II boost controller to ensure i can hit the high boost.

Ill post some pic of the install tomorrow night. So far I have the new rail mounted to the plate. Looks nice and will flow good because of the angle it puts the injectors at.

I can't wait to run stock fuel pressure again.

Here we have the history of your Port Fueler threads, past, present and future.

==============================================================

I think I might think about getting the Port Fueler!

Yeah, Definately going to be ordering the Port Fueler.

Ordered the Port Fueler!

Got my Port Fueler order confirmation.

Port Fueler somewhere in Arkansas!

I think I might get my Port Fueler today.

Got ½ of the Port Fueler.

Got the rest of the Port Fueler.

Port Fueler going on tomorrow.

Got pissed off with Port Fueler. Finish Install later.

Finished Port Fueler Install. Pics.

My shit blew up so no dyno videos (surprise).

=========================================================

well.. its almost correct,

2 things wrong though..

parts were never in arkansas... and i wont blow myself up. I have way too many tuning techniques to let that happen.

Originally posted by siueclipse
well.. its almost correct, 2 things wrong though.. parts were never in arkansas... and i wont blow myself up. I have way too many tuning techniques to let that happen.

Who gives a shit, I took comedic liberties. You're getting as redundant as "I have such-and-such turbo and 450cc DSM injectors, where do I start??!!oneone11".

YOU.

INSTALL.

NOW.

Less posting and more wrench turning already. Sheesh.

Originally posted by Ark
I think I might think about getting the Port Fueler! no dyno videos (surprise).

LOL!!!!





but sadly true

even after i put the portfuelr on, im not going to supply dyno sheets or videos. you people don't deserve it.

Originally posted by siueclipse
even after i put the portfuelr on, im not going to supply dyno sheets or videos. you people don't deserve it.

lol. I'm going to stop telling people what I do to my car completely. BTW... what injectors should I get for my car for my megasquirt system? :)



1996 Eclipse RS / 5-Speed / Aerogear Body / Coated in Magnetic Red Metallic rev.2 / T3 Turbo Intercooled @ 8 psi / More at http://home.insightbb.com/~eclipse2nr/
Mark Galyan - Indianapolis, Indiana

Originally posted by siueclipse
even after i put the portfuelr on, im not going to supply dyno sheets or videos. you people don't deserve it.

Cry us a fucking river. Your hands are still wrapped around your dick and keyboard instead of the instructions and a wrench.

Originally posted by Ark

Originally posted by siueclipse even after i put the portfuelr on, im not going to supply dyno sheets or videos. you people don't deserve it.

Cry us a fucking river. Your hands are still wrapped around your dick and keyboard instead of the instructions and a wrench.

Heh.


1996 Eclipse RS / 5-Speed / Aerogear Body / Coated in Magnetic Red Metallic rev.2 / T3 Turbo Intercooled @ 8 psi / More at http://home.insightbb.com/~eclipse2nr/
Mark Galyan - Indianapolis, Indiana

Well, Mr. Slick is running 780cc injectors and he boosts 19lbs daily with 93 octane gas. It all depends on your goals, I just purchased the MS from Mr. Slick and I personally plan on using 800+ injectors.

Hey Siueclipse, I used to have a lot of respect for your car and you because we had almost the same setup and I saw myself with the same dyno numbers you had. I used to bring you up constantly with my mechanics and tooners "There is this guy on the board I go to that does 349hp at the wheels on the same setup as I and he doesen't have cams!" I really don't know why I believed you, post some numbers and shut the people up. If it were me, I would feel a lot better on showing some dyno sheets proving to all these fuckers what I was capable of, but then again it seems to me that the sheets never existed.

I really dont see how hard it could be to scan some dyno sheet you have. After all, you have posted good pics of your car and the new PF system. Oh well, take care.

lol @ ark...such truth....

Originally posted by siueclipse
even after i put the portfuelr on, im not going to supply dyno sheets or videos. you people don't deserve it.

Don;t you think Bill Hahn deserves the posting of some dynos pics and videos!
:rolleyes

Quit trying to be a smartass... just install the PF... tune it, dyno it, and post what you get end of discussion. :)

aND refund my 25 dollars for the downpipe you never sent fuck wad.

DWAYNE H
1996 eclipse
under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job

2000 Yamaha R-1, 165rwhp 117 ftlbs tq

ALMOST THERE...... MUWHAHAHAHAHAHA

Originally posted by etx(SIUECLIPSE)
Yeah right. He is making 380fwhp with ebay hoses and the HRC 2.25" clamp on downpipe attached to his stock exhaust. And a SFMU, LOL! You should be maimed and beaten you fucking liar.

Originally posted by siueclipse even after i put the portfuelr on, im not going to supply dyno sheets or videos. you people don't deserve it.

ROFL Riiiiigghhhhttt that's why. It seems like anyone who asks to see your dyno sheets is an asshole and is undeserving of seeing them. By the way, there is no way Bill Hahn is relying on this guy to provide data important to the release of the port fueler. I can see it now.

Bill Hahn: So James do you have the results of the Portfueler install?
Siueclipse: I sure do I'm making eleventy billion hp and I only had to use six injectors.
Bill Hahn: That's amazing! That's even better than I expected. When can you get me the dyno sheet so I can post the results?
Siueclipse: I'm not posting a dyno sheet asshole your undeserving! *click*

The first 5 kits are shipping today. So, no, they are not waiting on any info it doesnt look like...

here's a cookie James!

..

Originally posted by siueclipse
even after i put the portfuelr on, im not going to supply dyno sheets or videos. you people don't deserve it.

Ok, i don’t care if everyone on this board hates you or likes you. You need to SHUT-THE-FUCK-UP. You don’t come on this board telling us how we don’t “deserve” proof. Its a fact, you lie...440's 20 pounds, 349 WHP and STILL RUNNING "PIG RICH"...By simple math, we can prove you are full of shit. If anyone doesn’t deserve anything, its you being able to post ANYTHING on this board. GET OFF THIS BORD, GO POST IN YOUR GSTURBO.COM PUSSY LAND. You’re such a fucking poser .

---------------------------------------
http://forums.kaptainmyke.com/index.php?act=Attach&type=post&id=32830
"Oh yea, well...My manifold does cool twisty things"
Http://www.EnhancedMotorSports.com ...

Originally posted by xtrickedeclipsex

Originally posted by siueclipse even after i put the portfuelr on, im not going to supply dyno sheets or videos. you people don't deserve it.

Ok, i don’t care if everyone on this board hates you or likes you. You need to SHUT-THE-FUCK-UP. You don’t come on this board telling us how we don’t “deserve” proof. Its a fact, you lie...440's 20 pounds, 349 WHP and STILL RUNNING "PIG RICH"...By simple math, we can prove you are full of shit. If anyone doesn’t deserve anything, its you being able to post ANYTHING on this board. GET OFF THIS BORD, GO POST IN YOUR GSTURBO.COM PUSSY LAND. You’re such a fucking poser . --------------------------------------- http://forums.kaptainmyke.com/index.php?act=Attach&type=post&id=32830 "Oh yea, well...My manifold does cool twisty things" Http://www.EnhancedMotorSports.com ...

WOW, I mean, WOW I could not have worded this better myself. :bowdown

Originally posted by siueclipse
even after i put the portfuelr on, im not going to supply dyno sheets or videos. you people don't deserve it.

Worst. Cop-out. Ever.

You don't have any. Give up the ruse already. Put up or shutup, i'm tired of this shit. You bring nothing to the table. If you don't post dyno sheets or email me something to back up your claims, i'm going to ban you as a fucking troll on Monday. The End.