I just received my T3 turbo with manifold and downpipe and oil lines. I decided to piece my setup together. But here are a few questions i got. Any Additional Advice would be awesome.

What type of fuel setup should i go with?
--I was thinking of going with a SAFC and bigger Injectors. Do gst injectors fit??

Any ideas Where can i get some intercooler piping from?
--Do Hahn intercooler piping fits?

Thanks

Originally posted by Talonator86
What type of fuel setup should i go with? --I was thinking of going with a SAFC and bigger Injectors.

I wouldn't worry too much about an SAFC at this point. You need A fuel system that works. Might I suggest a Vortech SFMU for starters. Plenty of info here and on the main site on how to hook one up and how they work (the latter part being most important).

Originally posted by Talonator86
Do gst injectors fit??

Yes, to a degree. They require wiring in resistors though. There are easier solutions but the details on how to use 450cc DSM injectors can be found through search and "Things We've Seen Before."

Originally posted by Talonator86
Any ideas Where can i get some intercooler piping from?

You're probably going to have to have someone fab up your piping. Probably the worst part when it comes to "custom" turbo kits.

Originally posted by Talonator86
Do Hahn intercooler piping fits? Thanks

Probably not. See above response.



All of these answers can easily be found through searching and using "Things We've Seen Before." Try it next time. Nothing you're doing is new.

That about covers it.