Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectWho here uses the ACCEL DFI setup?
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=7666
7666, Who here uses the ACCEL DFI setup?
Posted by RS_Guy, Jul-20-01 07:06 PM
HI, I got the ACCEL DFI setup too and I wanna find out some fellow 2GNT members so that we can share some info and tuning tips together.

Just post and I'll probably email you or something. Thanks!

Guy
RS_Guy

"If I wanted a 4G63, I'd have bought an EVO"



http://www.GTuned.com
7667, RE: Who here uses the ACCEL DFI setup?
Posted by rsXboy99, Jul-21-01 08:22 AM
I just bought the whole setup..and I just got it on my car today, though I havnt had a chance to run it yet. I had a star stage 2 setup, but Bill said I could use the stage V fuel setup, which includes the accel dfi, the inline pump, the injectors, and the 1:1 fpr. The install is pretty straight forward. By the way, Im taking it to the track tommorow So hopefully ill have some decent times to post. Im supposed to be able to run 26-27psi on race gas with my t3/t4 turbo. Everyday use is 15psi i believe
7668, Just don't over do it!!
Posted by Fast420A, Jul-21-01 08:47 AM
I would hate to hear about ANOTHER overboosted blown 420A!!





KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Ported Intake Manifold
Ported Throttle Body
Custom 2 1/4 inch exhaust
Empty Catalytic Convertor
225/50/16inch Wheels and Tires

7669, RE: Just don't over do it!!
Posted by rsXboy99, Jul-22-01 06:53 AM
I doubt i will blow my engine ... again. I have a built engine, and with my fuel demands met, I can run those big psi numbers. So I guess just keep your fingers crossed
7670, RE: Just don't over do it!!
Posted by Shant, Jul-23-01 01:54 AM
another 900 miles and I can throw on teh DFI myself let us know how it is,

Shant 98 Avenger
HRC stage 4


7671, RE: Who here uses the ACCEL DFI setup?
Posted by aj, Jul-23-01 03:27 AM
Just curious,how much did the whole Accel DFI set up run ya'What brand injectors BTW?Would you still need an S-AFC?
7672, RE: Who here uses the ACCEL DFI setup?
Posted by PuRe RaGe, Jul-23-01 03:55 AM
LAST EDITED ON 23-Jul-01 AT 08:57 AM (PST)

The whole set up plus my 800cc injectors and nitrous mapping unit cost a little over $1,499.00. This was pre set for the S-20G-N- Turbo I am useing. :)
Oh and no need for the S-AFC with this bad boy. But a MSD or Crane Ignition will be needed.

7673, RE: Who here uses the ACCEL DFI setup?
Posted by Armond30, Jul-23-01 02:32 PM
I have it, but I haven't adjusted any maps on it or anything. just trying to get it to run first:-/ I have some funky problem wiht my wiring harness that I have to work with tomorrow, and I also have to work with my MSD BTM.
If I coudl actaully get both of those things working tomorrow (woudl that be wierd) I could actally be driving my car around by the weekend. it's just basic electrical stuff. shouldn't be too hard to sort out.


A.D.P.
Bring it on............
7674, RE: Who here uses the ACCEL DFI setup?
Posted by Kiku, Jul-25-01 07:06 AM
ugh electrical stuff...i'm dealing with some electrical problems right now on my buddy's avenger hrc stage 2 =/


7675, RE: Who here uses the ACCEL DFI setup?
Posted by RS_Guy, Jul-25-01 10:15 AM
Cool guys.... Glad We got a few us here...

As soon as my new engine is broken in, I will be switching to the Accel unit. I figure it's better to break-in the engine using the stock ECU and low/no boost.

Guy
RS_Guy

"If I wanted a 4G63, I'd have bought an EVO"



http://www.GTuned.com