what size fuel line should i get if i get an SS one? i have a walbro intank fuel pump and want a SS line, also do i need to get any kind of fittings for in, if so what kind. lastly wher is the best place to get them in your opinions? thanks

look on the main site for a basic write up. There are better ways but that one takes the least thought. I dont have my write up done but mine uses hard line and is for a more experienced minded person.

Terry

96 Eagle talon ESI
Greddy header - Greddy exhaust

97 Eclipse
Star Stage II - Boost/oil/EGT gauges - 3" custom DP/Apexi N1 3" exhaust - SFMU/return line - Apexi SAFC - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)

I think most everyone uses -6an, but I used -4an. I got all my fuel line and fittings from Jeg's and Summit.

you used 4 an for the return or the feed? I heard one guy had a problem about a month ago where the walbro was over running the 4an.

I used the factory line as the return line 5/16 (5an) and ran a 3/8 (6an) for my primary.
96 Eagle talon ESI
Greddy header - Greddy exhaust

97 Eclipse
Star Stage II - Boost/oil/EGT gauges - 3" custom DP/Apexi N1 3" exhaust - SFMU/return line - Apexi SAFC - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)