| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | Couple turbo questions.not pulling and max boost |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=73187 |
73187, Couple turbo questions.not pulling and max boost
Posted by eclipseman1999, Jun-27-04 04:38 PM
I have a hrc stage2 and a 8:8:1 fully built bottom end and when I punch it from a stop is stops pulling around 4500-5000 rpms in every gear. Also when I shift it doesnt chirp or jerk hard at all is this from turbo lag? Can I run 10psi safely on my car with a sfmu and without bigger injectors?Oh and Im running around 7psi
|
73189, RE: Couple turbo questions.not pulling and max boost
Posted by techboy, Jun-27-04 05:43 PM
7lbs is not a whole heck of a lot of boost, so it may be just that. Howeve, my first inclination is that you have a boost leak somewhere, a small one, b/c you should not stop pulling at those RPM's. My car screams up to 7 grand and still wants more ... that is when it runs.
|
73245, RE: Couple turbo questions.not pulling and max boost
Posted by eclipseman1999, Jun-28-04 03:17 PM
Would running 9psi-10psi be safe on my car with a sfmu and a fully built bottom end. I plan on getting 400cc injectors later but dont have the funds right now.
|
73248, RE: Couple turbo questions.not pulling and max boost
Posted by Uberingram, Jun-28-04 03:39 PM
Originally posted by eclipseman1999
Would running 9psi-10psi be safe on my car with a sfmu and a fully built bottom end.
Yes, however not on stock injectors. I was maxing my stockers out at 110 psi at around 7-8 lbs of boost. Like you mentioned earlier, bigger injectors should be next on the list.
|