| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | Going after more HP! |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=72926 |
72926, Going after more HP!
Posted by customrsturbo, Jun-21-04 09:37 AM
Well, I received a gift on saturday from a friend. A used small 16G. It needs the compressor impeller and the thrust plate. So it looks like I will start saving for low compression pistons and rods for higher horsepower number. My TEO4H turbo is Ok, but I want more boost and power! Ran 14.5 @ 96mph at 10psi and now I'm running 12-14psi to get to my goal of 13's.
I'm excited to see the power upgrade after the installation of bottom end and 16g. Will let you know when I begin the installation on will post some pictures. MORE BOOST!
|
72950, RE: Going after more HP!
Posted by techboy, Jun-22-04 02:13 AM
I have a used Super 16G that is no good anymore - it needs to be rebuilt. But the exahust housing and inlet housing and many othere parts are still good. IF your interested in upgrading your 16G to a S16G let me know.
|
72951, RE: Going after more HP!
Posted by customrsturbo, Jun-22-04 03:58 AM
I'm interested. Tell me more.($?)
|
72997, RE: Going after more HP!
Posted by Enigma002, Jun-23-04 08:41 AM
Well if you get the Super 16g from techboy, Would you be intrested in selling your 16g for a reasonable price??
|
73031, RE: Going after more HP!
Posted by 97whitESi, Jun-24-04 03:53 AM
i have a question about your TEO4H, what is the second # for that? like 16g, 14b etc?
|
73043, RE: Going after more HP!
Posted by customrsturbo, Jun-24-04 07:24 AM
The TEO4H would be a 13C. Check this web page for flow map:
http://www.stealth316.com/2-3s-compflowmaps.htm
|