Ok, I am about ready to install the T-25 Turbo into my car. The kit is custom made and will work great, BUT once I got the turbo outside under my hood I was looking at fitting problems, I then got a PM from someone saying I have to rotate some areas, move the wastegate etc. Does anyone have a detailed faq or information on this, I REALLY need the help so that I can get this turbo in my car. I am sick of running N/A with my Turbo buddies. Anyway, PLEASE post with good information, I also did searches I didn't find anything that would help me.

Thanks again!

get ready for some fun. you have to rotate the compressor housing and then relocate the wastegate accordingly. do an advanced search in the turbo section. you will finid some good info there. my first set-up was a t-25 and another guy on here had one to...

Hrmm... I am excited :D WORK time! I am bored so I need something to do anyway :) LOL!

Hey do you have MSN, or YIM, or AIM? I want to talk to you about turbo oil lines. add me on all 3 divinitysnight Thanks

Check My imagestation account. there are enough pics on there to keep ya busy.

hey quick question, if I run 4psi with the T-25 do I need a FPR? Let me know thanks.

Originally posted by Divinity
hey quick question, if I run 4psi with the T-25 do I need a FPR? Let me know thanks.

don't half ass it! get the right parts to make it work the first time. if you dont have the Money, save. do it right or do it again!.

it doesnt matter what amount of boost you are running.... you need something to regulate the fuel.


"Who needs a 4G63? I'd rather walk the competition than my crank..."

- Bill Hahn.... 420a GOD :bowdown